La Crosse Technology CA74962 Setup Manual page 6

PROJECTION
Adjusting the Projection Image
Projection Brightness
PROJ.
Press the button to adjust
the projection's brightness (HI/
LOW/OFF).
Use the Rotation Wheel on the Projection Arm to rotate the
viewing angle of the image.
Note: The fixed focus projection image will look best at about 7ft. (2.1m).
The Projection Arm tilts forwards and
backwards to adjust the location of the
projection image.
PROJECTION
Projection Options
Projection Image Options
You can choose to see the (1) time, (2) outdoor
temperature and humidity, or (3) cycle through
both options.
Selecting Your Projection Image
1.
When an outdoor sensor is connected, hold the
PROJ.
button on the top of the station to toggle
between the projection options. If no sensor
is connected, this button will only adjust the
projection's brightness.
2.
Time will be the default projection image. Hold and release the
each time to switch between projection modes.
Time-Only Projection
09
Current Time
Outdoor Temperature
and Humidity
Outdoor Temperature & Cycle Through Both Options
Humidity-Only Projection
C
outdoor
PROJ.
button
10