Advertisement
Quick Links
INSTALLATION GUIDE
TATE AERLUX™ SHOWER ROSE
SYSTEM REQUIREMENTS
To ensure the optimum performance and customer satisfaction please adhere to the following:
• Flush out all pipe work prior to installation.
• Installation should comply with relevant local authority requirements.
Operating Pressures
Operating Hot Water Temperatures
Operating Cold Water Temperatures
Failure to comply with the above will void warranties
AS/NZS 3500.1 states that pressures above 500kPa can cause damage from water hammer, reduce the life of appliances, taps & fittings,
cause excessive noise in the system and recommend that a pressure limiting valve (PLV) be fitted.
WHAT IS IN THE PACK
CHOOSING THE AERLUX™ JETS FOR MAINS PRESSURE...
Fixed Shower Arm
Flow Regulator
(prefitted)
Shower Rose
For a softer shower, install
the Orange Aerlux™ Jet
MINIMUM
Hot
70kPa (10.2psi)*
Wall Flange
With the
For a harder shower, install
Flow Regulator
the Purple Aerlux™ Jet
fitted
Cold
500kPa (72.1psi)
70kPa (10.2psi)*
55° C
5° C
*Without an Aerlux™ jet or flow regulator fitted
1x Orange
Aerlux™ Jet
Aerlux™ Jet
MAXIMUM
60° C
N/A
1x Purple
Advertisement
Related Manuals for Felton AERLUX TATE
Summary of Contents for Felton AERLUX TATE
- Page 1 INSTALLATION GUIDE TATE AERLUX™ SHOWER ROSE SYSTEM REQUIREMENTS To ensure the optimum performance and customer satisfaction please adhere to the following: • Flush out all pipe work prior to installation. • Installation should comply with relevant local authority requirements. MINIMUM MAXIMUM Cold Operating Pressures...
- Page 2 You must retain proof of purchase of the product (such as an invoice or receipt) and proof of installation by a registered plumber and provide these to Felton on request. This warranty is for manufacturing defects only and does not cover any damage to product due to abuse, negligence or improper installation.