Chapter 2 Interoperability And Performance Planning; Compatible Standards; Specifications - Cisco Network Router User Manual

Interoperability and Performance Planning
This chapter describes the standards supported by the Cisco switches covered in this guide and provides
performance specifications for these switches.

Compatible Standards

The Cisco switches described in this guide are designed to interoperate with switches that support the
following standards:
•
•
•
•
•
•
•
•

Specifications

Table 2-1
Gateway.Table 2-2
The specifications listed in
Note
constrained by the memory requirements for other features. For example, the switches listed cannot
simultaneously support the maximum number of connections, links, and logical interfaces.
Part Number OL-3847-01 Rev. D0, April, 2004
Private Network-to-Network Interface (PNNI) Version 1
User-Network Interface (UNI) 3.0
UNI 3.1
UNI 4.0
Integrated Local Management Interface (ILMI) 4.0
ATM Inter-Network Interface (AINI) 1.0
Interim Inter-Switch Protocol (IISP) 3.0 and 3.1
Traffic Management (TM) 4.0
lists PNNI network specifications for MGX switches and the MGX 8880 Media
lists PNNI network specifications for SES equipped BPX switches.
Table 2-1 and Table 2-2 are recommended or maximum limits that may be
Cisco PNNI Network Planning Guide for MGX and SES Products, Release 5
C H A P T E R
2
2-1