Table of Contents
Advertisement
Documentation
Finding Documentation for Cisco MGX, BPX, SES, and CWM Products
The previous "Ordering Documentation" section applies to other Cisco documentation. Starting in 2003,
all documents listed in the "Related Documentation" section are available online only unless stated
otherwise. You can find the documents listed in
•
•
•
Changes to This Document
Table 4
Table 4
Chapter
Chapter 1, "Introduction to PNNI"
Chapter 2, "Interoperability and Performance
Planning"
Chapter 3, "Address and Closed User Group
Planning"
Chapter 4, "Planning Intermediate Route
Selection"
Cisco PNNI Network Planning Guide for MGX and SES Products, Release 5
xxviii
In your browser's URL field, enter www.cisco.com. In the top right search field, enter the complete
document part number (for example, enter OL-4538-01, including the -01 suffix). Click on GO.
For the Cisco Wide Area Network Manager (CWM) documents, in your browser's URL field, enter
http://www.cisco.com/univercd/cc/td/doc/product/wanbu/svplus/index.htm and look for the
CWM release number.
For all other documents, in your browser's URL field, enter
http://www.cisco.com/univercd/cc/td/doc/product/wanbu/index.htm. Look for the switch name
and release number. For example, look for MGX 8850 (PXM1E), then Release 5.
summarizes the changes made to this guide since the previous release.
Changes to This Book Since the Previous Release
Table 1
online as follows:
Changes
Added the following sections:
The PNNI Network Database
•
Simple Node Representation
•
Complex Node Representation
•
Added specifications for Release 5 and revised
some specifications and guidelines.
Minor revisions.
Rewrote most of the chapter. Added the following
sections:
Shortest Path Table Routing
•
•
How MGX and SES Nodes Select Links
Preferred Routing
•
Priority Routing
•
Grooming
•
Soft Rerouting
•
Priority Bumping
•
Part Number OL-3847-01 Rev. D0, April, 2004
About This Guide
Advertisement
Table of Contents
