Table of Contents
Advertisement
About This Guide
Table 3
Descriptions of Technical Manuals and Release Notes for Cisco Multiservice Switch Products (continued)
Document Title
Cisco ATM Services (AXSM) Configuration Guide and
Command Reference for MGX Switches, Release 5
OL-4548-01
Cisco Circuit Emulation Services (CESM/MPSM)
Configuration Guide and Command Reference for MGX
Switches, Release 5
OL-0453-01
Cisco Frame Relay Services (FRSM/MPSM) Configuration
Guide and Command Reference for MGX Switches, Release 5
OL-4541-01
Cisco MGX 8230 Edge Concentrator Installation and
Configuration, Release 1.1.3
DOC-7811215=
Cisco MGX 8230 Edge Concentrator Overview, Release 1.1.3
DOC-7812899=
Cisco MGX 8230 Multiservice Gateway Command Reference,
Release 1.1.3
DOC-7811211=
Cisco MGX 8230 Multiservice Gateway Error Messages,
Release 1.1.3
DOC-78112113=
Cisco MGX 8250 Edge Concentrator Installation and
Configuration, Release 1.1.3
DOC-7811217=
Cisco MGX 8250 Edge Concentrator Overview, Release 1.1.3
DOC-7811576=
Cisco MGX 8250 Multiservice Gateway Command Reference,
Release 1.1.3
DOC-7811212=
Cisco MGX 8250 Multiservice Gateway Error Messages,
Release 1.1.3
DOC-7811216=
Part Number OL-3847-01 Rev. D0, April, 2004
Description
Explains how to configure the AXSM cards and provides a
command reference that describes the AXSM commands in
detail. The AXSM cards covered in this manual are the
AXSM-XG, AXSM/A, AXSM/B, AXSM-E, and
AXSM-32-T1E1-E.
Provides software configuration procedures for provisioning
connections and managing the Circuit Emulation Service
Module (CESM) cards supported in this release. Also
describes all CESM commands. Includes software
configuration procedures for provisioning connections and
managing the new MPSM-8-T1E1 card as a CESM card
replacement.
Provides software configuration procedures for provisioning
connections and managing the Frame Relay Service Module
(FRSM) cards supported in this release. Also describes all
FRSM commands. Includes software configuration
procedures for provisioning connections and managing the
new MPSM-8-T1E1 card as an FRSM card replacement.
Provides installation instructions for the Cisco MGX 8230
edge concentrator.
Describes the system components and function of the
Cisco MGX 8250 edge concentrator.
Provides detailed information on the general command line
interface commands.
Provides error message descriptions and recovery
procedures.
Provides installation instructions for the Cisco MGX 8250
edge concentrator.
Describes the system components and function of the
Cisco MGX 8250 edge concentrator.
Provides detailed information on the general command line
interface commands.
Provides error message descriptions and recovery
procedures.
Cisco PNNI Network Planning Guide for MGX and SES Products, Release 5
Documentation
xxiii
Advertisement
Table of Contents
