Motor Replacement - Graco 246737 Repair And Parts Manual

Disassembly
WARNING
Page 2
1. Remove pump (13), Displacement Pump
Replacement, page 20.
CAUTION
Do not drop gear cluster (7) when removing drive
housing (10). Gear cluster may stay engaged in
motor front end bell or drive housing.
2. Remove drive housing (10), Drive Housing Re-
placement, page 18.
3. Remove four screws (18) and cover (39), Fig. 6,
page 14.
4. Disconnect all leads from board (35). Remove five
screws (36) and board.

Motor Replacement

5. Remove strain relief (37) and motor fan (2), page
23.
6. Remove three screws (22) behind board and
remove control housing (21), Fig. 6, page 14.
7. Remove four screws (22) and motor (1) from
frame (63).
Assembly
1. Install new motor (1) on frame (63) with four
screws (22).
2. Install control housing (21) with three screws (22).
3. Install strain relief (37) and motor fan (2), page 23.
4. Install board (35) with five screws (36), Fig. 6,
page 14. Connect all leads to board (35).
5. Install drive housing (10), Drive Housing Replace-
ment, page 18.
6. Install pump (13), Displacement Pump Replace-
ment, page 20.
19
309860