Page 2
Turning Leg Center Leg (M6x1mm) Flat Washers (M6x1mm)
Page 3
• Unpack all hardware bags and components to ensure y ou have all parts- • Read instructions, cover to cover- • Have 2 adults on hand for assembly- • • Assemble on a clean non-marring surface (packing foam) - • •...
Page 4
Place Seat Frame (A) upside down onto a padded, non marring Surface. Align and engage all turning legs on the bottom seat frame (A) and rotate clockwise leg (B). Continue to twist the legs firmly in the clockwise direction until they are fully tightened against the Seat Frame (A).
Page 5
Placing Center Leg (C) as shown. Secure the Center Leg (C) to Seat Frame (A) by using Allen Bolts (H-1), Spring Washer (H-2) and Flat Washer (H-3), stacking the hardware in the order as shown. Engage all bolts first, and then fully tighten using Allen Key (T-1).
Page 6
Turn the Bench upright. Place Seat Cushion (D) and Back Cushion (E) into position. Assembly is now complete and the Bench is ready for use. Note: Leveler can be used for additional adjustment (if needed). Check and ensure all legs are fully tightened every 3 months to ensure stability.
Page 7
CUSHION AND SLIP COVER CARE: For minor spots wipe with a wet cloth and use a mild detergent. Do not use bleach. Slip covers can also be placed in a washing machine. Remove the slip cover from the insert, do not place insert in the washing machine. Use gentle cycle, cold water and no bleach.
Need help?
Do you have a question about the MATTEO OCCASIONAL BENCH 606742 and is the answer not in the manual?
Questions and answers