Page 1
Assembly Instructions BUNDLE - SEGOVIA 4PC FURNITURE SET WITH SWIVEL CHAIRS AND LOVESEAT SKU 1062 1x BENCH 2x SWIVEL CHAIRS 1x COFFEE TABLE See following pages for individual component assembly instructions...
Page 2
Thank you for your purchase. If you have any questions pertaining to the assembly of this furniture piece, please contact the nearest World Market store. If you are not near a store, please call our customer service call center toll free at 877-967-5362 for assistance.
BACK REST SEAT RIGHT FRAME LEFT FRAME BACK CUSHION SEAT CUSHION SHORT ALLEN BOLT 8x45mm LONG ALLEN BOLT 8x55mm WOOD PLUG Ø15/Ø17x10mm Tool List LABEL QTY. ALLEN KEY PAGE 2...
Assemble on a clean non-marring surface (such as the product’s packing foam). Do not discard any packaging until the product has been fully assembled. In case of missing parts, please contact your nearest World Market store or call our customer service call center at 1-877-967-5362.
Assembly Steps Step 1 (H-1) SHORT ALLEN BOLT x2 (H-2) LONG ALLEN BOLT x6 (T-1) ALLEN KEY x1 Place Back Rest (A), Seat Panle (B) and Right Frame (C) onto a padded, non marring surface. Attach Back Rest (A) to Right Frame (C) using with Short Allen Bolts (H-1) and provided Allen Key (T-1). Turn components as illustrated above.
Page 6
Assembly Steps Step 3 (H-3) WOOD PLUG Turn assembly upright. Insert Wood Plug (H-3) and tap gently with hammer until flush to cover all holes as shown. Step 4 Step 5 Assembly is complete and ready for use. NOTE: Hardware Place Back Cushion (E) and Seat Cushion (F) onto assembly may loosen over time.
Page 7
Thank you for your purchase. If you have any questions pertaining to the assembly of this furniture piece, please contact the nearest World Market store. If you are not near a store, please call our customer service call center toll free at 877-967-5362 for assistance.
Page 8
BACK REST SEAT RIGHT FRAME LEFT FRAME BACK CUSHION SEAT CUSHION SWIVEL BASE SHORT ALLEN BOLT LONG ALLEN BOLT 8x45mm 6x25mm SPRING WASHER LONG ALLEN BOLT Ø8.5/Ø13x1.5mm 8x30mm WOOD PLUG FLAT WASHER Ø15/Ø17x10mm Ø8.5/Ø20x2mm Tool List LABEL QTY. ALLEN KEY PAGE 2...
Page 9
Assemble on a clean non-marring surface (such as the product’s packing foam). Do not discard any packaging until the product has been fully assembled. In case of missing parts, please contact your nearest World Market store or call our customer service call center at 1-877-967-5362.
Page 10
Assembly Steps Step 1 (H-1) SHORT ALLEN BOLT x2 (H-2) LONG ALLEN BOLT x5 (T-1) ALLEN KEY x1 Place the Right Frame (C) on it's back onto a padded, non marring surface. Position the Seat Frame (B) with the Backrest (A), align the holes, and insert the tenon into the mortise.
Page 11
Assembly Steps Step 3 (H-4) SHORT ALLEN BOLT x4 (H-5) SPRING WASHER x4 (H-6) FLAT WASHER x4 (T-1) ALLEN KEY x1 Using a second person to assist you, place assembly upside down onto a padded, non-marring surface. Position the Swivel Base (G) with bottom of the assembly as shown, and align the holes.
Need help?
Do you have a question about the SEGOVIA 1062 and is the answer not in the manual?
Questions and answers