HKS VFD Drive A2 Series User Manual page 18

A2 VFD
(0.75-30kW)
Pn 23
Multi-segment speed 4 frequency
Multi-segment speed mode 4-segment frequency
Pn 24 Multi-segment speed 5 frequency
Multi-segment speed mode 5-segment frequency
Pn 25 Multi-segment speed 6 frequency
Multi-segment speed mode 6-segment frequency
Pn 26
Multi-segment speed 7 frequency
Multi-segment speed mode 7-segment frequency
Pn 27 Point move frequency
Point move frequency
Pn 28
Choice of relay output
1 Stop VFD
3 VFD fault
5 Frequency decreasing 6 Frequency reached
If output condition is satisfied, ON/OFF states reverse.
Pn 29
2rd acceleration time
2rd acceleration time
Pn 30 2rd deceleration time
2rd deceleration time
Pn 31
2rd deceleration stop frequency
When runtime frequency is larger than this value,
When runtime frequency is smaller than this value,
As shown in Figure:
：000.10 Hz—400.00Hz
：1—6
：000.01S－650.00S
：000.01S－650.00S
acceleration/deceleration time is defined by Pn08,Pn09
acceleration/deceleration time is defined by Pn29,Pn30
：000.10 Hz—400.00Hz
：000.10 Hz—400.00Hz
：000.10 Hz—400.00Hz
：000.10 Hz—400.00Hz
2 Run VFD
4 Frequency increasing
：000.10 Hz—400.00Hz
15