Chapter 3 Control Panel - HKS VFD Drive A2 Series User Manual

A2 VFD
(0.75-30kW)
Button
RUN
STOP
STOP
RESE
T
REV
SET
▲▼
◄►
Adjustment Knob

Chapter 3 Control Panel

Start in operation mode running, and if press again it
stops VFD running.
There are different meanings to push this button during
different modes:
1.if the VFD is running, it would stop;
2. If a fault happens, the VFD would be reset;
3. If it is operated on menus, it returns to parent menu.
Change the VFD's direction. It also works during the
runtime.
Press this key to enter the menu setting, if in the menu
sub item, press this key to save this menu parameter and
go to the next level menu item.
Menu item selection and sub item data modification.
Menu item content modification selection or VFD
jogging button.
To control the frequency.
Description
8