HKS VFD Drive A2 Series User Manual page 16

A2 VFD
(0.75-30kW)
Pn 09
Deceleration time with range
Decelerate time (from Pn10 to 0Hz).
Pn 10 Maximum runtime frequency with range
Maximum output frequency by VFD.
Pn 11 Minimum runtime frequency with range
If the frequency from command below this value, VFD
will stop. It wouldn't recover until command frequency up
this value.
Pn 12
Motor rating frequency with range
It is used for modify the V/Fcurve.
Pn 13 Torque compensation with range
Large parameter may cause damage to the motor.
Pn14
Torque compensation frequency
doesn't provide torque compensation if runtime
frequency is larger than this value.
：000.01S－650.00S
：000.10Hz－400.00Hz
：000.10Hz－400.00Hz
：010.00Hz－400.00Hz
：0.0—4.0
：0.01Hz—400.00.00Hz
13
VFD