Active And Reload Buttons; Introduction - Hasselblad FlexColor V4 Software Reference Manual

Active and Reload Buttons

Introduction

The Color Correction, Histogram and Texture windows all have a set of
Active and Reload buttons (see below) arranged in a standard fashion,
while the Gradations window has two separate sets, one for sliders and
one for curves.
The button functions are described below.
Active Button
Reload button
Software Reference - FlexColor 4.0 for Camera Backs
When this button is grey, all corrections made in the
respective tool window will be applied to your preview and
saved image. Disabling the button will remove the
corrections without erasing your settings.
The Reload button has multiple functionalities. Simply
clicking it will reload the tools parameters from the currently
loaded setup.
The button has a small triangle on it, indicating that if you
click and hold down on the button a menu will popup. This
menu enables you to save and load presets for the tool that
the button is associated with.
The tool reload menus have at least one factory preset
named Default. You can use this to obtain neutral settings
for each tool – simply option click the Reload button to load
the default settings.
Please note that the Reload button located in the Color
Corrections area of the main FlexColor window does not
have the functionalities as described above - clicking this
button simply return all correction windows (Gradations,
Histogram, Color Correction, and Texture) to the settings
saved with the current setup (see "Correction Controls" on
page 24 for details).
Active and Reload Buttons
Introduction
85