Cc (Color Correction) Tab - Hasselblad FlexColor V4 Software Reference Manual

CC (Color Correction) Tab

The CC tab contains a color correction chart, which enables you to alter
the way input colors are mapped onto the output colors. It can be used to
remove or add color cast, or to create stronger colors in your images.
The matrix contains the same settings as the Color Correction window
(available from the Window menu), and displays all of the settings you
have made using that window. In many cases, it will be easier for you to
make adjustments using the Color Correction window instead. See
"Selective Color Correction" on page 99 for more information. However,
the matrix shown here gives a better overview of all of the color correction
settings for the current setup.
To activate the color correction, mark the Apply check box. To disable the
color correction settings, remove the mark from this box. Click on the box
to toggle the mark.
To modify the amount of any one color component in the image, click on
the button next to the target color along the top of the matrix. Then use the
up and down buttons for each component color along the left side of the
matrix to add or remove that component from the target color.
Alternatively, you can click on any of the fields in the matrix and edit the
value with your keyboard.
To modify the saturation in the entire image, use the Saturation up and
down buttons or input field.
Software Reference - FlexColor 4.0 for Camera Backs
The Setup Window
CC (Color Correction) Tab
37