Editing Colorsync Color Profiles - Hasselblad FlexColor V4 Software Reference Manual

FlexColor ICC Profiles
56

Editing ColorSync Color Profiles

In some cases, an ICC profile for your (or your service bureaus) specific
output device may be available. If so, then use it instead.
If your results are not satisfactory, then speak with your printer for advice
about how you should modify the profile. See "Editing ColorSync Color
Profiles" on page 56 for instructions.
Editing ColorSync Color Profiles
NOTE! The profile editor is only available with the Mac OS version of
FlexColor.
FlexColor includes both a ColorSync input profile designed for the Ixpress
digital camera backs and a set of generic output profiles, each of which is
designed to create good results under a different set of conditions.
These generic profiles will deliver adequate to excellent results. If, after
testing an output profile and speaking with your service bureau, you find
that you would like to fine tune an output profile, then follow the
procedure below.
The settings available for editing the output profiles are both highly
detailed and very powerful. In general, they are intended for users who
are very experienced in making color separations. Most likely, you should
speak with your service bureau about how to make these settings.
Software Reference - FlexColor 4.0 for Camera Backs