Using The Texture Window - Hasselblad FlexColor V4 Software Reference Manual

The Texture Window
102

Using the Texture Window

Using the Texture Window
To access the Unsharp Mask filter settings, click the triangle to the left.
Unsharp Mask Filter
To change the filter's settings, click in the appropriate field and edit the
value with your keyboard or use the up- and down arrow buttons. The
controls have the following effects:
•
Reload/Active Buttons: See page 85 for detailed description.
Please note that when the Active button is enabled the filter will not
only be applied to your preview image and final image but also to any
detail images in the Detail window.
•
Amount: Controls the strength of the sharpening effect. The higher the
value, the stronger the sharp lines will become. Depending on your
image, a value between 80 and 200 is recommended.
•
Dark limit: Sets the brightness level below which the filter has no effect.
This will keep the filter from enhancing noise or unwanted textures in
your image. The higher this number, the less extensive the sharpening
effect will appear. Depending on your image, a setting between 0 and
20 is recommended.
To open the Texture window, type cmd-4 or click on the
Texture button in the Correction area of the main FlexColor
window, or select Texture from the Window menu.
Software Reference - FlexColor 4.0 for Camera Backs