Related Manuals for Walker Edison W60VI2DD
Summary of Contents for Walker Edison W60VI2DD
- Page 5 Secure cam bolt (B) into part (1).
- Page 6 Insert wooden dowel (A) into part (4, 6, 7) as per diagram.
- Page 7 Insert wooden dowel (A) into part (3, 5), secure cam bolt (B) into part (3, 5) as per diagram.
- Page 8 Disassemble drawer slider (R) by sliding the slider arm and slider bracket apart. Depress the small lever of the slider bracket and carefully pull the two pieces apart. Repeat this process for both drawer sliders (R).
- Page 9 Secure slider bracket of drawer slider (R) to part (19, 20) using screw (N) with Philips screwdriver. Repeat this process for both drawers.
- Page 10 Secure slider arms of 2 sets drawer slider (R) to part (3, 5) using screw (N) with Philips screwdriver.
- Page 11 Secure part (7) to part (5) using cam lock (C) as per diagram.
- Page 12 Secure part (7) to part (3) using cam lock (C) as per diagram.
- Page 13 Attach part (2) to part (4, 6, 5, 3) using screw (F) with hex key (H) as per diagram.
- Page 14 Attach part (15, 16) using bolt (G) with hex key (H) as per diagram.
- Page 15 Insert part (10, 11, 12) into grooves of part (2, 3, 5, 6, 4) as per diagram.
- Page 16 Secure part (1) to part (3, 5, 4, 6) using cam lock (C) as per diagram.
- Page 17 1 11 匮 " ＼ （ 、 —————————— （ — _ _ l — ————— ———— —————— Attach plastic wedge (L) using screw (K) with Philip head screwdriver. Copyright©2019 by Walker Edison Furniture Co., LLC. All ights reserved. P.17 「...
- Page 18 Secure cam bolt (B) into part (17). Repeat this process for twice.
- Page 19 Attach part (19, 20) to part (18) using screw (M) with Philip head screwdriver. Repeat this process for twice.
- Page 20 Insert part (21) into grooves of part (19, 18, 20) as per diagram. Repeat this process for twice.
- Page 21 Attach part (17) to part (19, 20) using cam lock (D) as per diagram. Repeat this process for twice.
- Page 22 Place sticker (E) over holes as per diagram.
- Page 23 Insert shelf support pin (J) to part (5, 6, 4) as per diagram.
- Page 24 Place part (8, 9) onto shelf support pins as per diagram.
- Page 25 Secure hinge (Q) to part (14), hinge (P) to part (13) using screw (N) with Philips head screwdriver as per diagram.
- Page 26 Attach part (13) to part (5) using screw (N) with Philips head screwdriver as per diagram.
- Page 27 Attach part (14) to part (4) using screw (N) with Philips head screwdriver as per diagram.
- Page 28 Press down/up on slider bracket of drawer slider (R) lock, then insert the drawer into slider arm to lock it. Repeat this step twice.