How To Use; Usi Ng Your I Ron - Black & Decker ELITE PRO Series Use And Care Manual

H OW TO U SE
This product is for household use only.
G ET TI N G STA RT ED
• Remove all labels, tags and stickers attached to the
body, cord, or soleplate of the iron.
• Remove and save literature.
• Please note that water droplets may still be visible
in the tank at the time of purchase. This is from
the individual quality tests done to ensure that
every iron meets our high standards for product
performance.
F I L LI N G T H E WATE R TANK
1. With the iron on a flat surface with the soleplate
down, open the water-fill cover.
2. Using a clean measuring cup, pour water into
opening until water reaches the "MAX" level mark
on the side of the water tank. Do not overfill.
Close the water-fill cover securely.
3. Stand the iron on the heel rest.
4. To refill at any time during the ironing process,
unplug the iron and follow the above procedure.
D3300_D3300C_IB-hz_ESF_29209_revB_extrapages.indd 5 D3300_D3300C_IB-hz_ESF_29209_revB_extrapages.indd 5

USI NG YOUR I RON

1. Plug the iron into an outlet. The red power/
auto off light will illuminate under the handle,
indicating that the iron is heating.
2. Read the manufacturer fabric labels for material
content and clothing care recommendations to
help select the correct temperature and steam
settings.
3. Select the
temperature on
the iron by turning
the temp dial until
you've reached
the desired setting
based on the fabric
type: synthetic,
nylon or silk,
polyester, blend,
wool, cotton or linen.
4. Allow the iron about 2 minutes to heat up to the
desired temperature.
5. To dry iron (without steam), it is not necessary to
empty the water tank; simply move the variable
steam control all the way to the left on the dry
iron setting.
•
NO steam: synthetics, nylon, silk,
polyester
6. To iron with steam, push the variable steam
control to the desired amount of steam. For
5
6/6/22 2:59 PM 6/6/22 2:59 PM