Advertisement
Cruise Mode and Screen
Software version Rev D and up.
Cruise mode is identified by this icon:
Cruise mode provides hands-free operation for rotary and thrust, set by the operator.
Note:
Use Cruise mode for pull back only. Using cruise mode in thrust could cause damage.
You can only use cruise mode with clockwise functions.
Accessing the Cruise Screen
Push the cruise button on the joystick
screen.
Note:
For the 4-button joystick, push the trigger and top button together.
Activating Cruise
1.
If necessary, set the machine limits; refer to the
2.
Hold the joystick(s) in the active position for the amount of thrust and rotation speed you want and push
the cruise button on the joystick
Once set, use the cruise screen to adjust the settings
1.
Push buttons 1, 3, 5, or 8 to select the setting to adjust.
Note:
The icon will turn green and a green circle will highlight the option you select
(Figure
6) or push button 4 on the home screen to access the cruise
Figure 6
Figure 7
Cruise Mode Screen
Main Information Screen (page
(Figure
6).
(Figure
3
7).
g290320
g290322
1).
(Figure
8).
Advertisement
