Page 1
The Cadence Assembly Instructions Thank you for choosing Mycle and we’re thrilled to have you join our community of myclists. Your Cadence comes pre-built, but there is a small amount of assembly required to get it ready to ride. When you’ve unboxed your bike and removed all packaging, read on for your full assembly and quick start instructions.
Page 2
Step 1 Inserting the front wheel Quick release lever The Charge comes with a quick release front wheel, making it easy to put on and take off without tools. Add the quick release scewer into the centre of Quick your front wheel and loosley secure the nut on release the other end by 2 or 3 turnes.
Page 3
Step 2 Unfolding the handlebars Put down the kickstand so the bike stands up without you having to hold it. Your Charge will travel with the handlebars folded. To unfold, simply lift the bars up into place from its hinges. Straightn the lever so it locks into place.
Page 4
Step 4 Charge your battery To remove the battery you first need to tilt the saddle forward. On the back of the saddle is a lever. Push upwards on the lever to release the saddle and tilt forwards. You will find the battery keys zip tied to the handlebar cables.
Page 5
Do not forse the pedal as this could arms. cause damage to the rotary mechanism. Secure with the Velcro Mycle tie. You can Fold in the frame pull along using either the floor stand or the curved handle on the frame.
Page 8
Press and hold down to activate walking mode...