Advertisement
Step 4
Charge your battery
To remove the battery you first need to
tilt the saddle forward. On the back of the
saddle is a lever. Push upwards on the lever to
release the saddle and tilt forwards.
You will find the battery keys zip tied to the
handlebar cables. Each battery comes with a
set of 3 keys. Keep these safe.
Take one of the keys and put it into the
key lock of the battery. Turn to the unlock
position, which will close the bolt in the back
of the battery. Simply take the battery by its
handle and slide upwards. You can now take
your battery indoors to charge.
Before first use, your battery should be left to
charge for a full charge until the indicator on
the charging pack turns green.
To put the battery back in, slide it down the guide
rrail until it clicks into place, turn the key to the
locking position so the locking pin pops out of the
back, and close down the saddle so it clicks into
Step 5
Set your saddle height
Your saddle should be high enough that your leg
fully extends when pedalling, but doesn't loose
contact with the pedal.
Simply use the quick release lever to adjust the
saddle as required. If the seat tube is slipping
down when riding, simply open the lever, tighten
the lever bolt, and closing the lever back up again.
The lever should feel tighter to close and the seat
tube more secure.
place.
Advertisement
