Wifi Connectivity - Emerson Lumity XWEB5000 PRO Installing And Operating Instructions

7.7

WIFI CONNECTIVITY

This type of connection will allow you to directly access XWEB from a device equipped with a Wi-Fi
connection, or to allow XWEB to access an already configured Wi-Fi network. A prerequisite for these types
of connectivity is the installation of the WIFI dongle in the XWEB USB port.
ATTENTION: Only use dongles officially supported by this monitoring unit.
Connecting a mobile device to the XWEB access-point
XWEB is normally supplied preconfigured in this mode so that the user can search with his PC / smartphone
/ tablet to an "XWEB-PRO" SSID network. The default password is "dixellxwebpro".
Fixed IP 172.21.0.1
Connection of XWEB to existing Wi-Fi network
XWEB can be connected via Wi-Fi to a Wifi-AccessPoint already present on the site. In this case, you need
to temporarily access the XWEB interface with another type of connection (typically with a crossed cable) to
change the connection configuration parameters.
Configuration changes can be made by the user after accessing the user interface from the
System→Settings→Network menu.
ATTENTION: no access to port 22 service is provided in Wi-Fi.
1592010820 XWEB5000 PRO STP GB r1.0 18.03.2022.docx XWEB5000 PRO 18/20