Wifi Connectivity - Emerson DIXELL XWEB5000 PRO Installing And Operating Instructions

7.7

WIFI CONNECTIVITY

This type of connection will allow you to directly access XWEB f rom a device equipped with a Wi-Fi
connection, or to allow XWEB to access an already configured Wi-Fi network. A prerequisite for these t ypes
of connectivity is the installation of the WIFI dongle in the XWEB USB port.
ATTENTION: Only use dongles officially supported by this monitoring unit.
i. Connecting a mobile device to the XWEB access-point
XWEB is normally supplied preconfigured in this mode so that the user can search with his PC / smartphone
/ tablet to an "XWEB-PRO" SSID network. The default password is "dixellxwebpro".
i. Connection of XWEB to existing Wi-Fi network
XWEB can be connected via Wi-Fi to a Wifi-AccessPoint already present on the site. In this case, you need
to temporarily access the XWEB interface with another type of connection (typically with a crossed cable) to
change the connection configuration parameters.
Conf iguration changes can be made by the user after accessing the user interface from the
System→Settings→Network menu.
ATTENTION: no access to port 22 service is provided in Wi-Fi.
1592010820 XWE B5000 PRO STP GB r1.0 25.11.2020.docx XWEB5000 P RO 18/20