Secure mounting bracket
Configure dip switches
1.
The cable holder is optional and depicted in the
figure for demonstration purposes. The following
are recommended bolt types:
Masonry walls: 1/4" expansion bolts.
Torque: 8.8 N·m (78 lb·in)
Finished walls supported by wood studs: #8 wood
screws of 2" or above screw length.
Torque: 3 N·m (26 lb·in)
2.
Align the EVSE with the screw holes on the
mounting bracket.
3.
Secure the EVSE on the mounting bracket with the
supplied Torx T30 screws.
Torque: 1.5 N·m (13 lb·in)
Configure the dip switches with following steps:
14
v1.0.1