Configuration - Delta AC MAX Installation And Operation Manual

3.3

Configuration

Operating without OCPP system
User can configure the below information for EVSE:
Item
Authentication
Maximum charging time
Maximum charging current
System time
WiFi AP mode
Operating with OCPP system
User can configure the below information for EVSE:
Item
Charge Box ID
Server URL
OCPP version
Offline policy
Maximum charging current
System time
WiFi AP mode
Description
Choose the authorized mode for user authentication. Default will be "RFID
mode".
Choose the maximum charging time for each charging session. Default will
be "No limit".
Choose the maximum charging current per phase. It is limited by the dip
switch setting.
Choose the system time "YYYY/MM/DD- HH:MM:SS"
When active, EVSE is capable of commissioning through WiFi connection.
Description
The Box ID shall be consistent with the one in your OCPP system.
Enter the URL to connect to your OCPP system
Choose OCPP version. Default will be "OCPP 1.6J".
Choose the behavior when disconnection. Default will be "Local
authentication".
Choose the maximum charging current per phase. It is limited by the dip
switch setting.
Choose the system time "YYYY/MM/DD- HH:MM:SS"
When active, EVSE is capable of commissioning through WiFi connection.
22
v1.0.1