Table of Contents
Advertisement
20. Software Update
While radio is powered on, insert USB or SD card, USB or SD card has software update file plus other files.
Radio will switch to software update mode if long press more than 5 sec SK [1] and [5] buttons.
The maximum time is 15 minutes for updating process.
Short press SK 3 [YES] button, radio will begin to update. Display will show "SOFTWARE UPDATING..." in this case
the dots after UPDATING must be scroll one by one.
Short press SK 6 [NO] or 5 sec. no action, radio will revert to the LSM.
When software update is finished, the radio will display FINISH per 5 seconds.
5 second time out, the radio will reset and revert to tuner initial condition.
Prepared by Hector Gomez
HMI/ VWM DTEE / 52-222-2307414
DOC_HMI RADIO 2 DIN MIB-G LAM X1.8 revisada / 13/05/2011
Page 77 of 78
Advertisement
Chapters
Table of Contents
