Harman Kardon HS 300 Owner's Manual page 52

OPERATION
Select a preset station by following one of these steps:
1. With the cursor anywhere on the screen except in the Frequency
column, use the Numeric Keys to directly enter the desired preset
number, and press the Enter Button to begin listening to that station.
Remember to first select the desired tuner band.
2. With the cursor anywhere on the screen use the Preset Buttons on
the remote to scroll through the list of stations. The Preset Up Button
will navigate to a higher-numbered preset, and the Preset Down
Button navigates to a lower-numbered preset. However, the cursor
will appear to travel in the wrong direction, as the preset stations list
is numbered in increasing order down the screen.
3. With any station highlighted, use the
scroll through the list of presets, and press Enter to tune the high-
lighted station. Use the Navigation Buttons to highlight the large Page
Up and Page Down icons when visible on the left side of the screen.
Each press of either icon will skip one page of preset stations.
NOTE: Be aware that the screen saver may not activate itself
when the tuner is in operation. After selecting the desired station,
you may wish to turn off your video display to avoid "burn-in."
You will still be able to use the Search and Preset buttons, as
well as the Numeric Keys, to tune a new station or preset, which
will be displayed on the HS 300's front panel.
52
/ Navigation Buttons to
⁄ ¤