Farm King 1050 Operator And Parts Manual
  1. Manuals
  2. Brands
  3. Farm King Manuals
  4. Tools
  5. 1050
  6. Operator and parts manual
Farm King 1050 Operator And Parts Manual

Farm King 1050 Operator And Parts Manual

Backsaver auger
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATOR AND PARTS MANUAL
BACKSAVER AUGER
Models 1050, 1060, 1070, 1080
062022
FK306

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1050 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Farm King 1050

Summary of Contents for Farm King 1050

  • Page 1 OPERATOR AND PARTS MANUAL BACKSAVER AUGER Models 1050, 1060, 1070, 1080 062022 FK306...

  • Page 3: Table Of Contents

    1050, 1060, 1070, 1080 Backsaver Auger TABLE OF CONTENTS Manufacturer’s Statement: For technical reasons, Farm King reserves the right to modify machinery design and specifications provided herein without any preliminary notice. Information provided herein is of descriptive nature. Performance quality may depend on soil fertility, applied agricultural techniques, weather conditions, and other factors.
  • Page 4 1050, 1060, 1070, 1080 Backsaver Auger...

  • Page 5: Warranty Registration Form

    Customer / Owner Signature: Remove this Warranty Registration Form from the Operator And Parts Manual. Make two copies of the form. Send original Warranty Registration Form to Farm King. Give one copy to the customer and the dealer will keep one copy.
  • Page 6 Warranty Registration Form - 1050, 1060, 1070, 1080 Backsaver Auger...

  • Page 7: Introduction

    Farm King equipment. READ AND UNDERSTAND THIS OPERATOR AND PARTS MANUAL BEFORE OPERATING YOUR FARM KING EQUIPMENT. If you have any questions, see your Farm King dealer. This manual may illustrate options and accessories not installed on your Farm King equipment.
  • Page 8 Introduction - 1050, 1060, 1070, 1080 Backsaver Auger...
  • Page 9 Introduction - 1050, 1060, 1070, 1080 Backsaver Auger OWNER’S INFORMATION Serial Number Location Please enter the model and serial number in the Thank you for your decision to purchase a Farm space provided for easy reference. King Backsaver Auger. To ensure maximum...
  • Page 10 Introduction - 1050, 1060, 1070, 1080 Backsaver Auger EQUIPMENT IDENTIFICATION DISCHARGE SPOUT BRIDGING BOOM HYDRAULIC CYLINDER INPUT BOX ELBOW WHEEL PTO DRIVE LINE UNDERCARRIAGE INTAKE AUGER JACK SAFETY CHAIN HOPPER...

  • Page 11: Safety

    Safety - 1050, 1060, 1070, 1080 Backsaver Auger SAFETY SAFETY INSTRUCTIONS Safe Operation is The Operator’s Responsibility Safe Operation Needs A Qualified Operator Use Safety Rules Safety Rules For Power Take-Off (PTO) Driven Equipment Machine Requirements And Capabilities Transport Safety...
  • Page 12 Safety - 1050, 1060, 1070, 1080 Backsaver Auger...

  • Page 13: Safety Instructions

    Safety - 1050, 1060, 1070, 1080 Backsaver Auger SAFETY INSTRUCTIONS Safe Operation Needs A Qualified Operator Safe Operation is The Operator’s Responsibility WARNING Safety Alert Symbol Operators must have instructions before operating the machine. Untrained operators can cause injury This symbol with a warning statement means: or death.

  • Page 14: Use Safety Rules

    Safety - 1050, 1060, 1070, 1080 Backsaver Auger Use Safety Rules Safety Rules For Power Take-Off (PTO) Driven Equipment • Read and follow instructions in this manual and the tractor’s Operators Manual before operating. • Keep PTO shields and all guards in place. Replace damaged or missing shields and guards before •...

  • Page 15: Machine Requirements And Capabilities

    Safety - 1050, 1060, 1070, 1080 Backsaver Auger Machine Requirements And Capabilities Transport Safety • Stop the machine and engage the parking brake. • Do not exceed 20 mph (32 kph). Reduce speed on Install blocks in front of and behind the rear tires of rough roads and surfaces.

  • Page 16: Fire Prevention

    Fueling Operation • The Farm King machine must be in good operating condition before use. • Check all of the items listed on the service schedule under the 8 hour column before operation. (See Maintenance section) •...

  • Page 17: Operating Safety Zones

    Safety - 1050, 1060, 1070, 1080 Backsaver Auger OPERATING SAFETY ZONES Figure 3 WARNING AVOID INJURY OR DEATH • Do not allow small children, bystanders or unauthorized persons in the work area during operation. • Never stand or work under the auger and undercarriage when in the raised position or during operation.

  • Page 18: Equipment & Safety Signs (Decals)

    Safety - 1050, 1060, 1070, 1080 Backsaver Auger EQUIPMENT & SAFETY SIGNS (DECALS) Follow the instructions on all the signs (decals) that are on the equipment. Replace any damaged signs (decals) and be sure they are in the correct locations. Equipment signs are available from your Farm King equipment dealer.
  • Page 19 Safety - 1050, 1060, 1070, 1080 Backsaver Auger SECTION D-D SECTION E-E...
  • Page 20 Safety - 1050, 1060, 1070, 1080 Backsaver Auger Decal Identification [Figure 4] DECAL - 1050 BS - WHITE, PN 939498 (Item 5) DECAL - 1060 BS - WHITE, PN 939499 REFERENCE PLATE, PN 105420 (Item 1) DECAL - 1070 BS - WHITE, PN 939500...
  • Page 21 Safety - 1050, 1060, 1070, 1080 Backsaver Auger DECAL - CAUTION 14 POINT LIST RULES, PN DECAL - CHECK OIL, PN 967388 (Item 12) 961017 (Item 9) DECAL - WARNING CHECK PTO SHAFT, PN 108431 (Item 13) DECAL - DANGER ROTATING DRIVELINE, PN...
  • Page 22 Safety - 1050, 1060, 1070, 1080 Backsaver Auger DECAL - DANGER ELECTROCUTION, PN 909745 (Item 15) DECAL - LABEL INPUT BOX, PN 960371 (Item 16) DECAL - DANGER UPENDING, PN 960569 (Item...

  • Page 23: Safety Sign-Off Form

    Untrained operators and failure to follow instructions can cause injury or death. Farm King follows the general Safety Standards specified by the American Society of Agricultural and Biological Engineers (ASABE) and the Occupational Safety and Health Administration (OSHA). Anyone who will be operating and / or maintaining the auger must read and clearly understand ALL Safety, Operating and Maintenance information presented in this manual.
  • Page 24 Safety - 1050, 1060, 1070, 1080 Backsaver Auger...

  • Page 25: Assembly

    Assembly - 1050, 1060, 1070, 1080 Backsaver Auger ASSEMBLY GENERAL ASSEMBLY INFORMATION UNDERCARRIAGE TUBES INPUT BOX BRIDGING DISCHARGE SPOUT INTAKE LIFT BOOM TUBE AND UNDERCARRIAGE INTAKE AUGER HOPPER SAFETY CHAIN MANUAL HOLDER HYDRAULIC HOSE HOLDER JACK STAND PTO DRIVELINE HAND WINCH AND CABLE...
  • Page 26 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger...
  • Page 27 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger GENERAL ASSEMBLY INFORMATION IMPORTANT Unload the crate(s) and components in flat level area of adequate size to assemble the auger. Unload crate(s) and auger components carefully, DANGER not to cause damage to any of the components.
  • Page 28 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger UNDERCARRIAGE Figure 6 Assemble the undercarriage on a flat level surface. NOTE: The following images throughout the assembly section of this manual may not show your exact auger components as they appear but the procedure is correct for all 10 in.
  • Page 29 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Figure 8 Figure 10 Align the left undercarriage arm (Item 1) with the tab (Item 2) on the axle [Figure 8]. Install two 3/8” x 4-1/2” bolts (Item 3) and 3/8” lock Install the wheel with the valve stem facing out nuts.
  • Page 30 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Figure 11 Figure 13 Align the undercarriage tie plate (Item 1) with the mounting plates on the LH & RH undercarriage Align the LH and RH undercarriage arches (Item 1), arms [Figure 11].
  • Page 31 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Figure 15 Figure 17 Align the lift arm cradle (Item 1) to the bottom Align the lower lift arm mounts (Item 1) to the sides of the undercarriage mounts [Figure 15]. undercarriage arch mounts (Item 2) [Figure 17].
  • Page 32 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Figure 18 Figure 19 Align the upper lift arm mounts (Item 1) to the lower lift arm mounts (Item 2) [Figure 19]. Attach each mount using one clevis pin (Item 3), Install straps around the upper lift arm weldment washer, and cotter pin (Item 4) (depending on (Item 1).
  • Page 33 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Move the lift hydraulic cylinder to the work area. Attach the cylinder using one clevis pin (Item 2), washer, and cotter pin (Item 3) depending on Hydraulic cylinders depending on model: model [Figure 20].
  • Page 34 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Figure 21 Figure 22 Position the connecting link (Item 1) within the Position the pivot yoke (Item 1) within the mounts mounts of the lower lift arm. Slide the connecting of the upper lift arm. Slide the connecting pin pin (Item 2) through the mounts [Figure 21].
  • Page 35 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Figure 23 1070 and 1080 Models: • 1-1/4" ID rim washer • 1-1/4" swivel pin • 1/4" x 2" cotter pin Align the narrow mounts of the pivot yoke (Item 1) and connecting link (Item 2). Place the rod end of the hydraulic cylinder (Item 3) within the mounts [Figure 23].
  • Page 36 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger TUBES Figure 25 Assemble the tube on flat level surface. WARNING DO NOT permit bystanders to be in the work area Install a strap (Item 1) around the top tube (Item 2) when unloading and assembling components.
  • Page 37 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Figure 27 IMPORTANT Auger Tubes BS1050 models include two tubes (top and bottom). BS1060 and BS1070 models include three tubes (top, center, and bottom). IMPORTANT Remove the dust cap (Item 1) from the end of the top tube [Figure 27].
  • Page 38 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Figure 29 Slide the flighting (Item 1) from the lower tube section forward into the flighting of the top tube section [Figure 29]. Install one 1/2” x 2-3/4” Gr. 8 bolt (Item 2) and 1/2”...
  • Page 39 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger INPUT BOX Figure 33 Figure 31 Install a chain (Item 1) to the input box. Connect Install the splined stub shaft (Item 1) to the flighting the strap to an approved lifting device [Figure 33].
  • Page 40 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Figure 35 Figure 37 Keep guiding the input box onto the flighting until the flanges (Item 1) make contact [Figure 35]. Install a second bearing flange (Item 1) over the NOTE: The splined stub shaft will pass through splined stub shaft and 1-3/8”...
  • Page 41 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Figure 39 Figure 41 Install the 5/16” x 58 mm key (Item 1) to the splined stub shaft [Figure 39]. Figure 40 Place a straight edge (Item 1) along side the three sprockets.
  • Page 42 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Figure 43 Figure 45 Reinstall the guard (Item 1) to the input box [Figure 45]. Slide the connecting link (Item 1) through the two Figure 46 end links of the chain. Attach the connecting link using one plate and spring clip (Item 2) on the other side of the chain [Figure 43].
  • Page 43 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Figure 47 Tighten the castle nut (Item 1) just enough to install the cotter pin. There should be a small amount of tension on the flighting [Figure 47]. NOTE: Bag of hardware for the tube supplies an...
  • Page 44 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger BRIDGING Figure 50 Uncoil the four bridging cables. Cable Sizes (Cut Cable Length) DESC. LENGTH QTY. 1050 Models LOWER CABLE 903714 Ø3/8" x 23'6" BUNDLE UPPER CABLE 903718 Ø3/8" x 38'4" BUNDLE...
  • Page 45 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Figure 51 Figure 52 MAIN BRIDGING YOKE Remove the cable clamps (Item 1) from the main bridging yoke [Figure 52]. Place one long and one short cable on each side of the tube assembly (longest cable towards the outside).
  • Page 46 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Figure 54 Figure 55 TOP BRIDGING YOKE BOTTOM TUBE Remove the cable clamps (Item 1) from the top Attach cables to bottom tube. bridging yoke [Figure 54]. Place two cable yoke brackets (Item 1) back-to-back...
  • Page 47 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Figure 56 Figure 57 TOP/CENTER TUBE Attach cables to top/center tube. Place a mark (Item 1) on the cable tightening tool. This will help to tighten the cables evenly [Figure Install one 3/4" x 7-7/8" cable tightener (Item 1) to 57].
  • Page 48 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Figure 58 Tightening The Short Cables Tighten short cables just enough to take the slack out. Lower the input box end of the tube to the ground. Stand behind the input box and look down the full...
  • Page 49 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger DISCHARGE SPOUT INTAKE LIFT BOOM Figure 59 Figure 60 Raise the discharge end of the tube assembly. Align the intake lift boom (Item 1) with the mounting plate on the bottom tube section. Attach Align the discharge spout (Item 1) with the using four 1/2”...
  • Page 50 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger TUBE AND UNDERCARRIAGE Figure 61 Install the tube on the undercarriage on a flat level surface. WARNING With the strap (Item 1) installed around the center DO NOT permit bystanders to be in the work area tube and connected to an approved lifting device, when unloading and assembling components.
  • Page 51 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Figure 63 Figure 65 Remove the 1/2” x 1-1/4” bolt (Item 1), 1/2” lock nuts, and 1/2” flat washers from the lift arm cradle Align the RH & LH undercarriage arms with the (Item 2) [Figure 65].
  • Page 52 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Figure 67 Figure 68 Install a strap (Item 1) around the yoke pin. Attach the strap to an approved lifting device [Figure 68]. Raise the upper lift arm (Item 1) and align with the...
  • Page 53 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger INTAKE AUGER Figure 72 IMPORTANT The following images may not show your exact intake auger as it appears but the procedure is correct. Figure 70 SIDE VIEW Install the intake spacer (Item 1) on the top of the input box [Figure 70].
  • Page 54 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Figure 73 Figure 75 Lower the intake auger, align the u-joint (Item 1) with the top gearbox shaft (Item 2) of the input Install one plastic sleeve (Item 1) to the pivot box [Figure 75].
  • Page 55 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Figure 76 Figure 78 Slide the plastic sleeve (Item 1) up onto the intake Align the hole of intake auger mounting plate auger. Install the clamp (Item 2) and tighten to (Item 1) and the hole of intake box mounting plate secure the plastic sleeve to the intake auger (Item 2) (both sides) [Figure 76].
  • Page 56 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger HOPPER Figure 81 Figure 79 Place the rubber edge (Item 1) within the outer Align the two-hole bracket (Item 1) at the back of flange of the hopper [Figure 79]. the hopper. Align with holes in the rubber edge and outer hopper flange.
  • Page 57 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Figure 82 Figure 84 Install a ratchet strap (Item 1) onto the bracket Align the mounting holes on the hopper and intake (Item 2) on the top of the hopper (connect the auger.
  • Page 58 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Figure 86 Align the hinged intake auger cover (Item 1) with the four mounting holes in the hopper. Install four 1/4” x 3/4” bolts (Item 2) and 1/4” lock washers through the hinged intake auger cover and into the hopper.
  • Page 59 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger SAFETY CHAIN HYDRAULIC HOSE HOLDER Figure 88 Figure 90 Install the safety chain loop (Item 1) into the Install the hydraulic hose holder (Item 1) onto opening on the bottom side of the hitch, install the mounting bracket located on the top of the one 3/4”...
  • Page 60 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger PTO DRIVELINE HAND WINCH AND CABLE Figure 92 Figure 93 Push back on the collar (Item 1) and install the shaft into the gearbox until the collar slides forward, locking the shaft in the gearbox. Place the PTO...
  • Page 61 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Figure 94 IMPORTANT Do not remove the drum to install the cable. Figure 96 Locate the winch cable. Install the open end of the cable (Item 1) through the slot and over the pulley on the top of the lift boom [Figure 94].
  • Page 62 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger HOPPER SAFETY HOOK Figure 97 Install the quick link (Item 1) through the eye of the hook (Item 2). Install the quick link onto the safety chain at the desired location. Tighten the quick link nut to securely fasten the quick link and hook to the safety chain [Figure 97].
  • Page 63 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger HYDRAULIC LIFT CYLINDER NOTE: Apply teflon tape to the threads of each fitting. Install the -8 MNPT x -8 MNPT straight adaptor IMPORTANT into the flow control valve [Figure 98]. Install the -8 MORB x -8 SWFNPT 45° elbow onto...
  • Page 64 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Flow Control - 1070, 1080 Models IMPORTANT Figure 100 Place collection container under the hydraulic cylinder ports before removing the plugs. Figure 101 Gather one each of the following components [Figure 100]: NOTE: Model 1070 Backsaver Auger Flow Control Assembly shown above.
  • Page 65 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Hydraulic Hoess - All Models (1050, 1060, 1070, Apply teflon tape to the threads of the adapter 1080) fitting (Item 4). Install adapter fitting into the 1/2” ball valve (Item 3) [Figure 104].
  • Page 66 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger WORK LIGHT WIRING INSTRUCTIONS - F2735 Figure 107...
  • Page 67 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Bill Of Material ITEM PART NUMBER DESCRIPTION QTY. [Figure 107] 81546 5/16" FLAT WASHER (PL) 81549 5/16" X 3/4" HEX BOLT (PL) 84498 1/4" LOCK NUT (PL) 86171 3/8" X 1 1/4" HEX BOLT (PL) 812025 BOLT HEX 0.250NC X 4.00GR5 PL...
  • Page 68 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Work Light Harness Schematic Figure 108...
  • Page 69 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger TRANSPORT LIGHT WIRING INSTRUCTIONS - F2739 Figure 109...
  • Page 70 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Bill Of Material ITEM PART NUMBER DESCRIPTION QTY. [Figure 109] 81546 5/16" FLAT WASHER (PL) 81587 3/8" X 4" HEX BOLT (PL) 84268 5/8" X 1 1/2" HEX BOLT (PL) 812026 5/16" X 1" HEX BOLT (PL) 812362 5/16"...
  • Page 71 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger Transport Light Harness Schematic Figure 110...
  • Page 72 Assembly - 1050, 1060, 1070, 1080 Backsaver Auger...

  • Page 73: Operation

    Operation - 1050, 1060, 1070, 1080 Backsaver Auger OPERATION GENERAL INFORMATION Pre-Operation Checklist Break-In Checklist Tractor Requirements Drawbar Adjustment ENTERING & LEAVING THE OPERATOR’S POSITION Entering The Operator’s Position Leaving The Operator’s Position CONNECTING TO TRACTOR Hitching The Equipment Connecting The P TO Driveline...
  • Page 74 Operation - 1050, 1060, 1070, 1080 Backsaver Auger...

  • Page 75: General Information

    Operation - 1050, 1060, 1070, 1080 Backsaver Auger GENERAL INFORMATION 3. Make sure that all guards and shields are in place, secured and functioning as designed. Pre-Operation Checklist WARNING Before operating the auger for the first time and each time thereafter, check the following items:...

  • Page 76: Break-In Checklist

    Operation - 1050, 1060, 1070, 1080 Backsaver Auger Break-In Checklist Check the following mechanical items after 1 hour of operation and again after 10 hours of operation: NOTE: The break-in period is different from Re-torque wheel bolts to proper torque and check normal operating conditions.

  • Page 77: Tractor Requirements

    Operation - 1050, 1060, 1070, 1080 Backsaver Auger Tractor Requirements Drawbar Adjustment Figure 111 WARNING 16” (410 mm) Do NOT exceed 540 RPM PTO. Keep PTO shields and all guards in place. Keep away from moving parts. Keep bystanders away.

  • Page 78: Entering & Leaving The Operator's Position

    Operation - 1050, 1060, 1070, 1080 Backsaver Auger ENTERING & LEAVING THE CONNECTING TO TRACTOR OPERATOR’S POSITION Attach the auger to the tractor whenever the equipment is moved around the yard or into Entering The Operator’s Position working position. Enter the operator’s position, start the engine, and Tow the equipment by truck when traveling long release the parking brake.

  • Page 79: Connecting The P To Driveline

    Operation - 1050, 1060, 1070, 1080 Backsaver Auger Figure 113 Figure 114 Install the hitch pin (Item 1) and retaining pin to securely fasten the Backsaver Auger hitch to the tractor drawbar [Figure 114]. Attach the safety chain (Item 2) around the drawbar Turn the handle (Item 1) clockwise to raise the hitch [Figure 114].
  • Page 80 Operation - 1050, 1060, 1070, 1080 Backsaver Auger Figure 115 WARNING AVOID INJURY OR DEATH Do NOT exceed 540 RPM PTO. Keep PTO shields and all guards in place. Keep away from moving parts. Keep bystanders away. Retract the collar and slide the PTO driveline (Item 1) onto the tractor PTO shaft until it locks onto the shaft.

  • Page 81: Pto Driveline Length Check

    Operation - 1050, 1060, 1070, 1080 Backsaver Auger PTO Driveline Length Check PTO Driveline Bottoming Out Check Due to variations in distances between tractor PTO Stop the engine and leave the operator’s position shafts and implement input shafts, drivelines may (See “Leaving The...

  • Page 82: Reducing The Pto Driveline Length

    Operation - 1050, 1060, 1070, 1080 Backsaver Auger Reducing The PTO Driveline Length Figure 117 Stop the engine and leave the operator’s position IMPLEMENT (See “Leaving The Operator’s Position” in the PTO SHAFT Operation section). Make sure the PTO driveline and all rotating components have come to a complete stop before leaving the operator’s...

  • Page 83: Pto Driveline Engagement Check

    Operation - 1050, 1060, 1070, 1080 Backsaver Auger PTO Driveline Engagement Check 6. With the PTO driveline attached, position the three- point implement to where the telescoping PTO Stop the engine and leave the operator’s position driveline is at its maximum operating extension.

  • Page 84: Connecting Hydraulic Hoses

    Operation - 1050, 1060, 1070, 1080 Backsaver Auger Connecting Hydraulic Hoses To Connect: Figure 120 WARNING HIGH PRESSURE FLUID HAZARD To prevent serious injury or death from high pressure fluid: • Relieve pressure on system before repairing or adjusting. Pull back on the collar of the female coupler, push •...

  • Page 85: Auger Operation

    Operation - 1050, 1060, 1070, 1080 Backsaver Auger AUGER OPERATION Figure 121 Hopper Operation WARNING ENTANGLEMENT HAZARD To prevent injury to fingers and hands: • Keep hands clear of winch during operation CUT HAZARD With the hopper in storage position...

  • Page 86: Main Lift Cylinder Adjust

    Operation - 1050, 1060, 1070, 1080 Backsaver Auger Figure 123 Main Lift Cylinder Adjust Figure 124 Turn the knob (Item 1) on the flow control valve Hydraulic hopper mover / winch operation [Figure “IN” to decrease the speed the auger lowers. Turn 123]: the knob “OUT”...

  • Page 87: Auger Placement

    Operation - 1050, 1060, 1070, 1080 Backsaver Auger Auger Placement IMPORTANT DANGER Do not raise the main auger higher than 35° before lowering the intake auger or interference between ELECTROCUTION HAZARD the intake auger and the intake box will occur.

  • Page 88: Unloading Belly Dump Units

    Operation - 1050, 1060, 1070, 1080 Backsaver Auger Using the tractor controls, slowly raise the main Unloading Belly Dump Units auger to the desired height (do not exceed a 42° Figure 126 angle). Figure 125 Move the hopper (Item 1) out at a 90° angle from the auger [Figure 126].
  • Page 89 Operation - 1050, 1060, 1070, 1080 Backsaver Auger Figure 128 Figure 129 Move the belly dump unit forward until the rear compartment is directly over the hopper (Item 1) [Figure 128]. Move the belly dump unit back until the front...

  • Page 90: Unloading Rear And Side Dump Units

    Operation - 1050, 1060, 1070, 1080 Backsaver Auger Unloading Rear And Side Dump Units With tractor running at a low idle, engage the tractor PTO slowly to start the auger. Increase Figure 130 engine RPM (do not exceed 540 RPM PTO speed).

  • Page 91: Transportation

    Operation - 1050, 1060, 1070, 1080 Backsaver Auger TRANSPORTATION IMPORTANT Requirements DANGER Never exceed 20 mph (32 kph). Do not move or transport the auger unless the hopper and intake auger are in the raised / ELECTROCUTION HAZARD transport position and securely fastened before transporting.

  • Page 92: Transporting Procedure

    Operation - 1050, 1060, 1070, 1080 Backsaver Auger Transporting Procedure WARNING Remove all supports on the discharge end and anchoring from the intake end (if required). Figure 131 The weight of the hopper and intake auger assembly must be supported by the transport chain whenever the auger is moved.
  • Page 93 Operation - 1050, 1060, 1070, 1080 Backsaver Auger Figure 135 WARNING AVOID INJURY OR DEATH Before you leave the operator’s position: • Always park on a flat level surface. • Place all controls in NEUTRAL. • Engage the park brake.
  • Page 94 Operation - 1050, 1060, 1070, 1080 Backsaver Auger...

  • Page 95: Maintenance

    Maintenance - 1050, 1060, 1070, 1080 Backsaver Auger MAINTENANCE TROUBLESHOOTING SERVICE SCHEDULE LUBRICATION Recommendations Locations GEARBOXES Lower Gearbox Upper Gearbox Cleaning And Inspection AXLES Wheel Lug Nut Torque Tire / Wheel Replacement Tire Pressure BRIDGING CABLES Cable Inspection Lubrication Cleaning...
  • Page 96 Maintenance - 1050, 1060, 1070, 1080 Backsaver Auger...

  • Page 97: Troubleshooting

    Maintenance - 1050, 1060, 1070, 1080 Backsaver Auger TROUBLESHOOTING WARNING Instructions are necessary before operating or servicing equipment. Read and understand the Operator And Parts Manual and safety signs (decals) on equipment. Follow warnings and instructions in the manuals when making repairs, adjustments or servicing. Check for correct function after adjustments, repairs or service.

  • Page 98: Service Schedule

    If a problem is encountered that is difficult to solve, even after having read through this troubleshooting section, please call your local Farm King dealer. Before you call, please have this Operator And Parts Manual and the serial number of your machine at hand.

  • Page 99: Lubrication

    Maintenance - 1050, 1060, 1070, 1080 Backsaver Auger LUBRICATION Lubricate the following grease locations EVERY 50 HOURS: Recommendations NOTE: The PTO shaft is equipped with extended Always use a good quality multi-purpose / lithium life bearings. Do not over-grease. base grease when lubricating the equipment.
  • Page 100 Maintenance - 1050, 1060, 1070, 1080 Backsaver Auger Figure 139 Figure 141 Apply two pumps of grease to the universal joint Apply two pumps of grease to the intake hopper (Item 1) on the hopper auger drive shaft [Figure drive shaft (Item 1) [Figure 141].
  • Page 101 Maintenance - 1050, 1060, 1070, 1080 Backsaver Auger Figure 143 Apply three pumps of grease to the rod end of the lift cylinder (Item 1) [Figure 143]. Lubricate the following grease locations EVERY 8 HOURS: Figure 144 Apply oil to the dual auger drive chains (Item 1)

  • Page 102: Gearboxes

    Maintenance - 1050, 1060, 1070, 1080 Backsaver Auger GEARBOXES Upper Gearbox Figure 146 Lower Gearbox Figure 145 Check the gearbox oil level every 50 hours or weekly. Remove the fill / drain plug (Item 1) from the gearbox. Oil level should be at the bottom of the Check the gearbox oil level every 50 hours or plug hole [Figure 146].

  • Page 103: Axles

    Maintenance - 1050, 1060, 1070, 1080 Backsaver Auger AXLES Figure 147 Wheel Lug Nut Torque Check the torque on wheel lug nuts daily. Tighten lug nuts to 80–100 ft.-lbs. (108–135 N•m) torque. Tire / Wheel Replacement Empty the Backsaver Auger (if required).

  • Page 104: Bridging Cables

    Maintenance - 1050, 1060, 1070, 1080 Backsaver Auger BRIDGING CABLES Tension Adjust Cable Inspection IMPORTANT IMPORTANT Completely unload auger before adjusting bridging cables. Always wear the proper hand and eye protection when serving the equipment. Figure 148 Regularly check the tightness of all cable clamps to avoid slipping.
  • Page 105 Maintenance - 1050, 1060, 1070, 1080 Backsaver Auger Figure 149 Figure 150 Loosen all cable clamps along the cable being Remove bolt (Item 1) and lock nut (from mounting tightened. bracket on the bottom tube section), move the yoke (Item 2) back, one hole. Re-install the bolt and lock Tighten the nut (Item 1) of the desired bridging nut.

  • Page 106: Storage And Return To Service

    Maintenance - 1050, 1060, 1070, 1080 Backsaver Auger STORAGE AND RETURN TO SERVICE Return To Service After the equipment has been in storage, it is Storage necessary to follow a list of items to return the Sometimes it may be necessary to store the equipment to service.

  • Page 107: Parts Identification

    Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger PARTS IDENTIFICATION GENERAL PARTS INFORMATION UNDERCARRIAGE - 1050 MODELS UNDERCARRIAGE - 1060 MODELS UNDERCARRIAGE - 1070, 1080 MODELS STUB AXLE LIFT ARMS - 1050 MODELS LIFT ARMS - 1060 MODELS LIFT ARMS - 1070, 1080 MODELS...
  • Page 108 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger...
  • Page 109 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger...

  • Page 110: General Parts Information

    Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger GENERAL PARTS INFORMATION The parts identification section list descriptions, part numbers and quantities for all North America Base Model BS10 Series Augers. Contact your Farm King dealer for additional parts information. UNDERCARRIAGE - 1050 MODELS DETAIL A...
  • Page 111 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger ITEM PART NUMBER DESCRIPTION QTY. 812363 3/8" LOCK NUT (PL) 812364 1/2" LOCK NUT (PL) 812482 5/8" LOCK NUT (PL) 812624 1/4" FLAT WASHER PL 81525 1/4" X 3/4" HEX BOLT (PL) 81527 1/4"...

  • Page 112: Undercarriage - 1060 Models

    Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger UNDERCARRIAGE - 1060 MODELS DETAIL A 13 22 917394...
  • Page 113 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger ITEM PART NUMBER DESCRIPTION QTY. 812363 3/8" LOCK NUT (PL) 812364 1/2" LOCK NUT (PL) 812482 5/8" LOCK NUT (PL) 812624 1/4" FLAT WASHER PL 81525 1/4" X 3/4" HEX BOLT (PL) 81527 1/4"...

  • Page 114: Undercarriage - 1070, 1080 Models

    Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger UNDERCARRIAGE - 1070, 1080 MODELS DETAIL A 11 10 917680...
  • Page 115 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger ITEM PART NUMBER DESCRIPTION QTY. 812363 3/8" LOCK NUT (PL) 812364 1/2" LOCK NUT (PL) 812482 5/8" LOCK NUT (PL) 812624 1/4" FLAT WASHER PL 81525 1/4" X 3/4" HEX BOLT (PL) 81527 1/4"...

  • Page 116: Stub Axle

    Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger STUB AXLE 906571...
  • Page 117 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger ITEM PART NUMBER DESCRIPTION QTY. 81834 3/4" SLOTTED HEX NUT 901427 5-BOLT HUB ASSEMBLY (DUST CAP PN 968409) 912727 STUB AXLE WELDMENT 9812416 3/4" SAE FLAT WASHER (BR) 9812486 1/8" X 1 1/2" COTTER PIN (BR)

  • Page 118: Lift Arms - 1050 Models

    Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger LIFT ARMS - 1050 MODELS DETAIL A 917355...
  • Page 119 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger ITEM PART NUMBER DESCRIPTION QTY. 84522 1" ID SAE FLAT WASHER (PL) F9183 CYLINDER-3.50" DIA X 30" X2098 SEAL KIT 960093 PIVOT YOKE WELDT 960096 CONNECTING LINK WELDT 960099 YOKE PIN WELDT 1.000" DIA 960102 CONNECTING PIN BASE WELDT 1.000"...

  • Page 120: Lift Arms - 1060 Models

    Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger LIFT ARMS - 1060 MODELS DETAIL A 917395...
  • Page 121 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger ITEM PART NUMBER DESCRIPTION QTY. 84522 1" ID SAE FLAT WASHER (PL) F9184 4" X 36" HYDRAULIC CYLINDER X2318 SEAL KIT 960094 PIVOT YOKE WELDT 960097 CONNECTING LINK WELDT 960100 YOKE PIN WELDT 1.000" DIA 960103 CONNECTING LINK BASE PIN 1.000"...

  • Page 122: Lift Arms - 1070, 1080 Models

    Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger LIFT ARMS - 1070, 1080 MODELS DETAIL A 917681...
  • Page 123 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger ITEM PART NUMBER DESCRIPTION QTY. 81210 1/4" X 2" COTTER PIN (PL) F9185 4" X 40" HYDRAULIC CYLINDER X2318 SEAL KIT 924030 CYLINDER PIN 960095 PIVOT YOKE WELDT 960098 CONNECTING LINK 960101 YOKE PIN WELDT 1.250"...

  • Page 124: Tubes Layout - 1050 Models

    Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger TUBES LAYOUT - 1050 MODELS DETAIL A DETAIL B DETAIL C DETAIL D SECTION F-F DETAIL E 917357...
  • Page 125 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger ITEM PART NUMBER DESCRIPTION QTY. 811791 1/2" X 2" HEX BOLT (PL) 811792 3/8" X 1 1/2" HEX BOLT GR.5 (PL) 812208 NIPPLE 1/2" BODY 1/2"-14 NPTF QUICK CONNECT 812363 NUT LOCK (STEEL) 0.375 GRB PL 812364 1/2"...

  • Page 126: Tubes Layout - 1060 Models

    Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger TUBES LAYOUT - 1060 MODELS DETAIL A DETAIL B DETAIL C 19 23 DETAIL D DETAIL E DETAIL F SECTION G-G 917656...
  • Page 127 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger ITEM PART NUMBER DESCRIPTION QTY. 811791 1/2" X 2" HEX BOLT (PL) 811792 3/8" X 1 1/2" HEX BOLT GR.5 (PL) 812208 NIPPLE 1/2" BODY 1/2"-14 NPTF QUICK CONNECT 812363 NUT LOCK (STEEL) 0.375 GRB PL 812364 1/2"...

  • Page 128: Tubes Layout - 1070, 1080 Models

    Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger TUBES LAYOUT - 1070, 1080 MODELS 29 30 DETAIL A DETAIL C DETAIL B SECTION G-G DETAIL D 22 25 DETAIL E DETAIL F 917683...
  • Page 129 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger ITEM PART NUMBER DESCRIPTION QTY. 811791 1/2" X 2" HEX BOLT (PL) 811792 3/8" X 1 1/2" HEX BOLT GR.5 (PL) 812208 NIPPLE 1/2" BODY 1/2"-14 NPTF QUICK CONNECT 812363 NUT LOCK (STEEL) 0.375 GRB PL 812364 1/2"...

  • Page 130: Tube Sections - 1050 Models

    Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger TUBE SECTIONS - 1050 MODELS Bottom Tube F1075 ITEM PART NUMBER DESCRIPTION QTY. 81592 3/8" HEX NUT (PL) 81593 3/8" LOCK WASHER (PL) 86170 3/8" X 1" HEX BOLT GR.5 (PL) 905644 BOTTOM SECTION TUBE 27' 4"...

  • Page 131: Top Tube

    Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger Top Tube F9070 ITEM PART NUMBER DESCRIPTION QTY. 812362 5/16" LOCK NUT (PL) 81549 5/16" X 3/4" HEX BOLT (PL) 960006 WELDT-TOP SECTION TUBE BS1050 960012 TOP SECTION FLTG WELDT 960034...

  • Page 132: Tube Sections - 1060 Models

    Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger TUBE SECTIONS - 1060 MODELS Bottom Tube F1077 ITEM PART NUMBER DESCRIPTION QTY. 81592 3/8" HEX NUT (PL) 81593 3/8" LOCK WASHER (PL) 86170 3/8" X 1" HEX BOLT GR.5 (PL) 905645 BOTTOM SECTION TUBE 17' 4"...

  • Page 133: Top Tube

    Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger Top Tube F9071 ITEM PART NUMBER DESCRIPTION QTY. 812362 5/16" LOCK NUT (PL) 81549 5/16" X 3/4" HEX BOLT (PL) 960007 WELDT-TOP SECTION TUBE BS1060 960012 TOP SECTION FLTG WELDT 960034...

  • Page 134: Tube Sections - 1070, 1080 Models

    Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger TUBE SECTIONS - 1070, 1080 MODELS Bottom Tube F1076 ITEM PART NUMBER DESCRIPTION QTY. 812711 JIC UNION -10-10 81592 3/8" HEX NUT (PL) 81593 3/8" LOCK WASHER (PL) 86170 3/8" X 1" HEX BOLT GR.5 (PL) 905646 BOTTOM SECTING TUBE 27' 4"...

  • Page 135: Top Tube

    Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger Top Tube F9072 ITEM PART NUMBER DESCRIPTION QTY. 812362 5/16" LOCK NUT (PL) 81549 5/16" X 3/4" HEX BOLT (PL) 960008 WELDT-TOP SECTION TUBE BS1070 960012 TOP SECTION FLTG WELDT 960034...

  • Page 136: Intake Lift Boom

    Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger INTAKE LIFT BOOM F0099...
  • Page 137 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger ITEM PART NUMBER DESCRIPTION QTY. 905602 PULLEY HOLDER WELDMENT 905601 SIDE PLATE WELDMENT 905604 LIFT BOOM ARM WELDMENT 905568 PIN WELDMENT, 5/8” x 4-1/4” LG 905570 PIN WELDMENT, 3/4” x 6-3/8” LG 961846 CABLE PULLEY, 3-1/2”...

  • Page 138: Input Box

    Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger INPUT BOX SECTION A-A 930577...
  • Page 139 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger ITEM PART NUMBER DESCRIPTION QTY. 811792 3/8" X 1 1/2" HEX BOLT GR.5 (PL) 81210 1/4" X 2" COTTER PIN (PL) 812363 3/8" LOCK NUT (PL) 812365 3/4" LOCK NUT (PL)
  • Page 140 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger Input Box Continued 19 15 SECTION A-A F2312...
  • Page 141 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger ITEM PART NUMBER DESCRIPTION QTY. 811790 3/4" X 4 1/2" HEX BOLT GR5 (PL) 812362 5/16" LOCK NUT (PL) 812365 3/4" LOCK NUT (PL) 81523 1/4" X 1/2" HEX BOLT (PL) 81620 1/2"...

  • Page 142: Input Box Idler

    Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger INPUT BOX IDLER 4 10 917449...
  • Page 143 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger ITEM PART NUMBER DESCRIPTION QTY. 812026 5/16" X 1" HEX BOLT (PL) 812362 5/16" LOCK NUT (PL) 917450 WELDT-IDLER 960177 1/4" SQ X 1 1/4" KEY 960182 REVERSE KIT IDLER SHAFT 01 3/8" X 8 3/4"...

  • Page 144: Intake Auger

    Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger INTAKE AUGER SECTION B-B 16 3 SECTION A-A 918022...
  • Page 145 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger ITEM PART NUMBER DESCRIPTION QTY. 812026 5/16" X 1" HEX BOLT (PL) 812362 5/16" LOCK NUT (PL) 812363 3/8" LOCK NUT (PL) 812365 3/4" LOCK NUT (PL) 84050 3/4" S.A.E. FLAT WASHER (PL) 84467 3/4"...

  • Page 146: Hopper Single Flighting

    Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger HOPPER SINGLE FLIGHTING 14 20 11 13 10 13 10 24 917521...
  • Page 147 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger ITEM PART NUMBER DESCRIPTION QTY. 812624 1/4" FLAT WASHER PL 81525 1/4" X 3/4" HEX BOLT (PL) 81527 1/4" X 1" HEX BOLT (PL) 84498 1/4" LOCK NUT (PL) 903483L RUBBER CONN PL 14GA X 3"SQ.

  • Page 148: Hopper Multi Flighting

    Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger HOPPER MULTI FLIGHTING 917526...
  • Page 149 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger ITEM PART NUMBER DESCRIPTION QTY. 812624 1/4" FLAT WASHER PL 81525 1/4" X 3/4" HEX BOLT (PL) 81527 1/4" X 1" HEX BOLT (PL) 84498 1/4" LOCK NUT (PL) 911359 RUBBER HOPPER EDGING...
  • Page 150 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger Hopper Multi Flighting Continued 39 26 3 21 20 F1843...
  • Page 151 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger ITEM PART NUMBER DESCRIPTION QTY. 812026 5/16" X 1" HEX BOLT (PL) 812362 5/16" LOCK NUT (PL) 812363 3/8" LOCK NUT (PL) 812365 3/4" LOCK NUT (PL) 81525 1/4" X 3/4" HEX BOLT (PL) 81546 5/16"...
  • Page 152 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger F2294...
  • Page 153 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger ITEM PART NUMBER DESCRIPTION QTY. 930749 SHEAR BOLT CLUTCH WITH PUSH PIN 1600 Nm ± 10% 930750 CROSS KIT WITH GREASE NIPPLE ON BEARING CUP 930751 CV WIDEANGLE DOUBLE YOKE 80°...
  • Page 154 Parts Identification - 1050, 1060, 1070, 1080 Backsaver Auger...

  • Page 155: Specifications

    Specifications - 1050, 1060, 1070, 1080 Backsaver Auger SPECIFICATIONS DIMENSIONS SPECIFICATIONS HARDWARE TORQUE VALUES Metric Chart Imperial Chart HYDRAULIC CONNECTION O-Ring Fitting (Straight Thread) O-Ring Face Seal Connection Flare Fitting Port Seal (O-Ring Boss) Fitting Tubelines And Hoses...
  • Page 156 Specifications - 1050, 1060, 1070, 1080 Backsaver Auger...
  • Page 157 Specifications - 1050, 1060, 1070, 1080 Backsaver Auger DIMENSIONS Figure 151 42° 24° 6°...
  • Page 158 Specifications - 1050, 1060, 1070, 1080 Backsaver Auger DESCRIPTION [Figure 151] 1050 1060 1070 Overall Width (A) 118 in. 130 in. 154 in. Discharge Spout Height @ 42° Angle (B) 425 in. 518 in. 573 in. Discharge Spout Height @ 24° Angle (C) 277 in.
  • Page 159 Specifications - 1050, 1060, 1070, 1080 Backsaver Auger SPECIFICATIONS DESCRIPTION 1050 1060 1070 1080 Size 10” x 50’ 10” x 60’ 10” x 70’ 10” x 80’ Tubing 12 Gauge Flighting 7 Gauge Flighting Shaft 11 Gauge, 2-3/8” Diameter Undercarriage 3”...
  • Page 160 Specifications - 1050, 1060, 1070, 1080 Backsaver Auger HARDWARE TORQUE VALUES Metric Chart NOTE: Do not use the values listed in the charts if a different torque value or tightening procedure is specified in this manual for a specific application. Torque values listed are for general use only.
  • Page 161 Specifications - 1050, 1060, 1070, 1080 Backsaver Auger Imperial Chart NOTE: Do not use the values listed in the charts if a different torque value or tightening procedure is specified in this manual for a specific application. Torque values listed are for general use only.
  • Page 162 Specifications - 1050, 1060, 1070, 1080 Backsaver Auger HYDRAULIC CONNECTION Port Seal (O-Ring Boss) Fitting O-Ring Fitting (Straight Thread) Port Seal And O-ring Boss Tightening Torque Tubeline O.D. Thread Size N•m (ft-lb) Lubricate the O-ring before installing the fitting. 1/4”...

  • Page 163: Warranty

    Warranty - 1050, 1060, 1070, 1080 Backsaver Auger WARRANTY FARM KING BASE LIMITED WARRANTY Repair Parts Limited Warranty What Is Not Covered Authorized Dealer And Labor Costs Warranty Requirements...
  • Page 164 Warranty - 1050, 1060, 1070, 1080 Backsaver Auger...
  • Page 165 If Farm King determines that it will pay labor costs for warranty work, it will do so by issuing a credit to the dealer’s or distributor’s account. Work done by a third party must be pre-...
  • Page 166 Corrections of defects and improper workmanship in the manner, and for the applicable time periods, provided for herein shall constitute fulfillment of all responsibilities of Farm King to the purchaser, and Farm King shall not be liable in negligence, contract, or on any other basis with respect to the subject equipment.
  • Page 168 www.farm-king.com 301 Mountain Street South Morden, MB R6M 1X7 E-mail: info@buhler.com www.farm-king.com Equipment shown is subject to change without notice. ©2022 Buhler Trading Inc. Printed in Canada TSX:BUI a division of Buhler Industries Inc.

This manual is also suitable for:

106010701080

Table of Contents