Dolby Pro Logic (Non-Digital) - Speaker Level - Harman Kardon HKTS 10 Owner's Manual

SPEAKER CONNECTIONS (continued)
Dolby Pro Logic*
(Non-Digital) – Speaker Level
USE THIS INSTALLATION METHOD FOR
DOLBY PRO LOGIC APPLICATIONS (NOT
DOLBY DIGITAL, DTS OR OTHER DIGITAL
PROCESSING), WHERE THE RECEIVER/
PROCESSOR DOES NOT HAVE A SUB-
WOOFER OUTPUT, OR A VOLUME-
CONTROLLED PREAMP (LINE-) LEVEL
OUTPUT:
Connect your receiver or amplifier's front
left and right speaker terminals to the
left and right Speaker-Level Input ¡
terminals on the SUB-TS10 subwoofer that
are marked "High Level In. " Connect the
left and right Speaker-Level Output ™
terminals on the SUB-TS10 subwoofer
that are marked "High Level Out" to the
corresponding terminals on the back of
your front left and right speakers.
Connect your receiver or amplifier's center,
and surround left and right speaker
terminals to the corresponding terminals
on the back of your center, and surround
left and right speakers.
When all connections have been made, plug
the AC power cord on the subwoofer into
an AC outlet.
12
Front Left
– +
Front Left
Surround Left
Surround Left
– +
Center
– +
SUB-TS10
Subwoofer
R L
Receiver
Front Right
Center
Surround Right
Front Right
– +
Surround Right
– +