INSTALLATION INSTRUCTIONS
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or ether injury.
Remove
packaging
materials
•
Remove and dispose of/recycle packaging
materials.
Remove tape and glue residue from surfaces before turning
on the air conditioner. Rub a small amount of liquid dish soap
over the adhesive with your fingers. Wipe with warm water
and dry.
•
Do not use sharp instruments,
rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your air conditioner.
•
Handle air conditioner
gently.
1. Remove the air conditioner from the carton and place it on
cardboard.
2. Remove shipping screws from the rear of the cabinet.
fL
1
3. Remove the window lock bracket and screw from the air
conditioner
and set aside.
4.
A
.............. _
B
A. Window lock bracket screw
B. Window lock bracket
Remove the ground screw and ground wire from the front of
the air conditioner
base. Save the ground screw.
5=
'_ ..............
B
A. Greenground wire
B. Ground screw
Pull on handles to slide air conditioner
out of cabinet. Place
air conditioner
on cardboard.
A
A. Shipping screws
A. Handles
NOTE: Do not lift, push, pull or remove any expanded
polystyrene (foam) from inside the air conditioner.
It is net
packing material.