Table of Contents
Advertisement
(9)
Wake On-LAN Headers (3-pin): WOL
This connector connects to a LAN card with a WAKE ON-LAN output. This
connector power up the system when a wake up signal is received through the
LAN card.
NOTE: This feature requires that Wake On LAN or Ring In Wake up is enabled.
(10) FAN Speed Headers (3-pin): CPUFAN, SYSFAN
These connectors support cooling fans of 350mA (4.2 Watts) or less, depending
on the fan manufacturer, the wire and plug may be different. The red wire
should be positive, while the black should be ground. Connect the fan's plug to
the board taking into consideration the polarity of connector.
(11) IR infrared module Headers (9-pin): IR
IDE LED
PW BTN SMI SW
System Case Connections
WOL
1
5VSB
G ND
WO N
3
Wake-On-LAN Headers
CPUFAN
1
3
SYSFAN
3
1
21
Advertisement
Table of Contents
