1. Manuals
  2. Brands
  3. JETWAY Manuals
  4. Motherboard
  5. 865GF
  6. User manual

JETWAY 865GF User Manual

M/b for socket 478 pentium 4 processor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
M/B For Socket 478 Pentium 4 Processor
Trademark:
*
Specifications and Information contained in this documentation are furnished for information use only, and are
subject to change at any time without notice, and should not be construed as a commitment by manufacturer.
865GF
USER'S MANUAL
NO. G03-865GF
Release date: May 2004
Rev:1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 865GF and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for JETWAY 865GF

Summary of Contents for JETWAY 865GF

  • Page 1 865GF USER'S MANUAL M/B For Socket 478 Pentium 4 Processor NO. G03-865GF Rev:1.0 Release date: May 2004 Trademark: Specifications and Information contained in this documentation are furnished for information use only, and are subject to change at any time without notice, and should not be construed as a commitment by manufacturer.

  • Page 2: Table Of Contents

    TABLE OF CONTENT USER’S NOTICE........................... ii MANUAL REVISION INFORMATION .................... ii COOLING SOLUTIONS ........................ii CHAPTER 1 INTRODUCTION OF 865GF MOTHERBOARD FEATURE OF MOTHERBOARD ..................1 SPECIFICATION........................2 PERFORMANCE LIST ......................3 LAYOUT DIAGRAM & JUMPER SETTING ..............4 CHAPTER 2 HARDWARE INSTALLATION HARDWARE INSTALLATION STEPS ................

  • Page 3: User's Notice

    TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE MANUFACTURER. THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE 865GF MOTHER-BOARD AND WE DO ASSURE THIS MANUAL MEETS USER’S REQUIREMENT BUT WILL CHANGE, CORRECT ANY TIME WITHOUT NOTICE.

  • Page 4: Chapter 1 Introduction Of 865Gf Motherboard

    865GF Motherboard 1-1 Feature of motherboard The 865GF motherboard is design for use Intel Pentium 4 Processor in 478 Pin Package/ Northwood Processor with the Intel 865G Chipset delivers a high performance and professional desktop platform solution. Which utilize the Socket 478 design (Support Hyper Threading CPU) and the memory size expandable to 2.0GB.

  • Page 5: Specification

    1-2 Specification Spec Description ∗ ATX form factor 6 layers PCB size: 18.5x25.5cm Design ∗ Intel 865G Graphics Memory Controller Hub (GMCH) Chipset ∗ Intel 82801EB I/O Controller Hub (ICH5) Chipset ∗ Support Intel Pentium 4 478 Pin package utilizes Flip-Chip Pin CPU Socket (mPGA478B Socket) Grid Array (FC-PGA2) package processor...

  • Page 6: Performance List

    1-3 Performance List The following performance data list is the testing result of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users (the different Hardware & Software configuration will result in different benchmark testing results.) Performance Test Report CPU: Intel Pentium 4 2.53GHz (533MHz FSB)/3GHZ (800MHz FSB) mPGAB package...

  • Page 7: Layout Diagram & Jumper Setting

    1-4 Layout Diagram & Jumper Setting PRINT PS/2 Mouse LINE-IN PS/2 Keyboard LINE-OUT COM1 USB1 K/B Power ON Jumper (JP4) CPU Socket PS2 KB/Mouse Port ATX Power Connector ATX 12V Power Conn. CPUFAN Serial Port COM2 USB Power ON Jumper (JP6) USB Port (USB2) PC99 Back Panel DIMM Socket X2...
  • Page 8 Jumpers Jumper Name Description Page CMOS RAM Clear 3-pin Block Keyboard Power On Enable/Disabled 3-pin Block JP5, JP6 USB Power On Enabled/Disabled 3-pin Block Connectors Connector Name Description Page ATXPWR ATX Power Connector 20-pin Block P.12 ATX12V ATX 12V Power Connector 4-pin Block P.12 KB/MOUSE...

  • Page 9: Chapter 2 Hardware Installation

    Chapter 2 Hardware installation 2-1 Hardware installation Steps Before using your computer, you had better complete the following steps: 1. Check motherboard jumper setting 2. Install CPU and Fan 3. Install System Memory (DIMM) 4. Install Expansion cards 5. Connect IDE and Floppy cables, Front Panel /Back Panel cable 6.

  • Page 10: Install Cpu

    (3) CMOS RAM Clear (3-pin): JP1 A battery must be used to retain the motherboard configuration in CMOS RAM short 1-2 pins of JP1 to store the CMOS data. To clear the CMOS, follow the procedure below: Turn off the system and unplug the AC power Remove ATX power cable from ATX power connector Locate JP1 and short pins 2-3 for a few seconds Return JP1 to its normal setting by shorting pins 1-2...

  • Page 11: About Intel Pentium 4 478-Pin Cpu

    BIOS (Basic Input/Output System) - the program logic used to boot up a computer and establish the relationship between the various components. Driver - software, which defines the characteristics of a device for use by another device or other software. Processor - the "central processing unit"...

  • Page 12: Install Memory

    2-4 Install Memory This motherboard provides 184-pin DUAL INLINE MEMORY MODULES (DIMM) sites for memory expansion available from minimum memory size of 64MB to maximum memory size of 2.0GB DDR SDRAM. WARNING! Due to Intel 865 chipset specification limitation this motherboard can not support 8Mx16/16Mx16/32Mx16 Double Side memory Module.

  • Page 13: Expansion Card

    2-5 Expansion Cards WARNING! Turn off your power when adding or removing expansion cards or other system components. Failure to do so may cause severe damage to both your motherboard and expansion cards. 2-5-1 Procedure For Expansion Card Installation 1. Read the documentation for your expansion card and make any necessary hardware or software setting for your expansion card such as jumpers.

  • Page 14: Interrupt Request Table For This Motherboard

    2-5-3 Interrupt Request Table For This Motherboard Interrupt request are shared as shown the table below: INT A INT B INT C INT D INT E INT F INT G INT H √ Slot 1 √ Onboard VGA √ Onboard LAN √...

  • Page 15: Connectors, Headers

    2-6 Connectors, Headers 2-6-1 Connectors Power Connector (20-pin block) : ATXPWR ATX Power Supply connector. This is a new defined 20-pins connector that usually comes with ATX case. The ATX Power Supply allows to use soft power on momentary switch that connect from the front panel switch to 2-pins Power On jumper pole on the motherboard.
  • Page 16 Audio Connector : CN1 This Connector are 3 phone Jack for LINE-OUT, LINE-IN, MIC . Line-out (Green):Audio output to speaker for Front Speaker output in 6-Channel Audio input to sound chip or REAR Speaker output in 6-Channel Line-in (Blue): Microphone Connector or Center/Base Speaker output in 6-Channel MIC (Pink): VGA Connector (15-pin D-Sub) Connector: VGA VGA is the 15-pin D-Subminiature female connector for display monitor.
  • Page 17 (13) Secondary IDE Connector (40-pin block): IDE2 This connector connects to the next set of Master and Slave hard disks. Follow the same procedure described for the primary IDE connector. You may also configure two hard disks to be both Masters using one ribbon cable on the primary IDE connector and another ribbon cable on the secondary IDE connector.

  • Page 18: Headers

    2-6-2 Headers Serial Port COM2 Header (9-pin) : COM2 COM2 Pin 1 Note: Orient the read marking on the COM2 ribbon cable to pin 1 Serial Port COM2 Header 1394/USB/Front Audio Header for Front Panel (2x13pin ): JW_1394_USB This header connect to Front Panel Speaker, MIC connector, 1394-A/1394-B and USB port with cable.
  • Page 19 SPDIF VCC PO WE R BUTTO N G ND SPDIF _ IN RE SE T BUTTO N Speaker connector: SPEAK This 4-pin connector connects to the case-mounted speaker. See the figure below. LCD Display Panel/ LED Header (2x6pin) : JW_LCD Power LED: PWR-LED The Power LED is light on while the system power is on.
  • Page 20 (10) IR infrared module Headers (5-pin) : IR This connector supports the optional wireless transmitting and receiving infrared module. You must configure the setting through the BIOS setup to use the IR function. Pin 1 IR infrared module Headers (11) CD Audio-In Headers (4-pin) : CDIN CDIN are the connectors for CD-Audio Input signal.

  • Page 21: Starting Up Your Computer

    2-7 Starting Up Your Computer 1. After all connection are made, close your computer case cover. 2. Be sure all the switch are off, and check that the power supply input voltage is set to proper position, usually in-put voltage is 220V∼240V or 110V∼120V depending on your country’s voltage used.

  • Page 22: Chapter 3 Introducing Bios

    Chapter 3 Introducing BIOS The BIOS is a program located on a Flash Memory on the motherboard. This program is a bridge between motherboard and operating system. When you start the computer, the BIOS program gain control. The BIOS first operates an auto-diagnostic test called POST (power on self test) for all the necessary hardware, it detects the entire hardware device and configures the parameters of the hardware synchronization.

  • Page 23: The Main Menu

    3-3 The Main Menu Once you enter Award  BIOS CMOS Setup Utility, the Main Menu (Figure 3-1) will appear on the screen. The Main Menu allows you to select from fourteen setup functions and two exit choices. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.

  • Page 24: Standard Cmos Features

    Load Optimized Defaults Use this menu to load the BIOS default values that are settings for optimal performances system operations. Load Standard Defaults Use this menu to load the BIOS default values that are factory settings for the stable performance system operation. Set Supervisor/User Password Use this menu to set User and Supervisor Passwords.

  • Page 25: Advanced Bios Features

    Time The time format is <hour><minute><second>. Primary Master/Primary Slave Secondary Master/Secondary Slave Press PgUp/<+> or PgDn/<–> to select Manual, None, Auto type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category.
  • Page 26 Anti-Virus Protection Allows you to choose the VIRUS Warning feature for IDE Hard Disk boot sector protection. If this function is enabled and someone attempt to write data into this area, BIOS will show a warning message on screen and alarm beep. Disabled (default) No warning message to appear when anything attempts to access the boot sector or hard disk partition table.

  • Page 27: Advanced Chipset Features

    Typematic Rate Setting Keystrokes repeat at a rate determined by the keyboard controller. When enabled, the typematic rate and typematic delay can be selected. The settings are: Enabled/Disabled. Typematic Rate (Chars/Sec) Sets the number of times a second to repeat a keystroke when you hold the key down. The settings are: 6, 8, 10, 12, 15, 20, 24, and 30.

  • Page 28: Dram Timing Settings

    Video RAM Cacheable Select Enabled allows caching of the video BIOS, resulting in better system performance. However, if any program writes to this memory area, a system error may result. The settings are: Enabled and Disabled. Memory Hole At 15M-16M You can reserve this area of system memory for ISA adapter ROM.

  • Page 29: Integrated Peripherals

    3-7 Integrated Peripherals CMOS Setup Utility – Copyright(C) 1984-2004 Award Software Integrated Peripherals > Onboard IDE Function Press Enter Item Help > Onboard Device Function Press Enter > Onboard Super IO Function Press Enter Init Display First PCI Slot Menu Level > Power On Function Hot Key KB Power On Password...

  • Page 30: Onboard Device Function

    OnChip IDE Primary/Secondary The integrated peripheral controller contains an IDE interface with support for two IDE channels. Select Enabled to activate each channel separately. The settings are: Enabled and Disabled. IDE Primary/Secondary Master/Slave PIO The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of the four IDE devices that the onboard IDE interface supports.

  • Page 31: Onboard Super Io Function

    USB Keyboard Legacy Support Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have a USB keyboard. The settings are: Enabled, Disabled. On-Chip Serial ATA The settings are: Disabled, Auto, Combined Mode, Enhanced Mode, SATA Only. Default setting is Auto.

  • Page 32: Power Management Setup

    Parallel Port Mode : Standard Parallel Port : Enhanced Parallel Port : Extended Capability Port SPP/EPP/ECP/ECP+EPP To operate the onboard parallel port as Standard Parallel Port only, choose “SPP.” To operate the onboard parallel port in the EPP modes simultaneously, choose “EPP.” By choosing “ECP”, the onboard parallel port will operate in ECP mode only.

  • Page 33: Pm Timer Reload Events

    Video Off Method This determines the manner in which the monitor is blanked. DPMS (default) Initial display power management signaling. Blank Screen This option only writes blanks to the video buffer. V/H SYNC+Blank This selection will cause the system to turn off the vertical and horizontal synchronization ports and write blanks to the video buffer.

  • Page 34: Pnp/Pci Configuration Setup

    3-9 PnP/PCI Configuration Setup This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed the CPU itself uses when communicating with its own special components. This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings.

  • Page 35: Irq Resources

    3-9-1 IRQ Resources CMOS Setup Utility – Copyright(C) 1984-2004 Award Software IRQ Resources IRQ-3 assigned to PCI Device Item Help IRQ-4 assigned to PCI Device IRQ-5 assigned to PCI Device IRQ-7 assigned to PCI Device Menu Level >> IRQ-9 assigned to PCI Device IRQ-10 assigned to...

  • Page 36: Miscellaneous Control

    CPUFAN/SYSFAN Temp1/Temp2 Value This item allow users setting the temperature value of CPU/SYSTEM for FAN speed controller change the FAN speed the setting are 30°C∼100°C. CPUFAN/SYSFAN Speed below Temp1/Temp2 This item allow the FAN work in 50%, 60%, 70%, 80%, 90%, 100% of full speed when the CPU/SYSTEM temperature below Temp1/Temp2.

  • Page 37: Load Standard/Optimized Defaults

    3-12 Load Standard/Optimized Defaults Load Standard Defaults When you press <Enter> on this item, you get confirmation dialog box with a message similar Load Standard Defaults (Y/N)? N Pressing <Y> loads the BIOS default values for the most stable, minimal-performance system operations.

  • Page 38: Chapter 4 Driver & Free Program Installation

    Chapter 4 DRIVER & FREE PROGRAM INSTALLATION Check your package and there is A MAGIC INSTALL CD included. This CD consists of all DRIVERS you need and some free application programs and utility programs. In addition, this CD also include an auto detect software which can tell you which hardware is installed, and which DRIVERS needed so that your system can function properly.

  • Page 39: Inf Install Intel 865/875 Chipset System Driver

    4-1 INF install Intel 865/875 chipset system driver After you have completed the installation of your operation system (WINDOWS 98SE). You will find an UNKNOWN DEVICE in the device manager (START/SETTING/CONTROL PANEL/ SYSTEM/DEVICE MANAGER). You have to install INF driver as shown below: 1.

  • Page 40: Sound Install Alc Audio Codec Driver

    Click VGA when MAGIC INSTALL Click NEXT When Intel (R) Extreme MENU appears Graphics Driver Software Setup appear Click YES, This is Announce CopyRight If You Want Re-start Computer , Click FINISH 4-3 SOUND install ALC AC97 Codec Audio Driver 1.

  • Page 41: Lan Install Realtek Rtl8110S Gigabit Ethernet Nic Driver

    5. Sound Effect select and KaraOK Mode 6. Manual Sound Effect Setting Function Note: The path of the file For WIN98/NT4.0/WIN2K/XP is X:\CODEC\ALC\SETUP.EXE Note: In Win2K/WinME users have to click Control Panel\System\Device Manager\ DVD\CD-ROM drives to Enabled digital CD Audio for the CD-ROM Device when use the SPDIF-Out digital signal.

  • Page 42: Usb2.0

    4-5 USB2.0 install Intel USB2.0 Driver Windows 98SE/ME USB 2.0 Driver installation 1. Click USB2.0 when Magic Install Menu 2. This license agreement appear, click Yes, then appear finish install driver , click Close and restart your computer Windows 2000/XP USB 2.0 Driver installation Windows 2000 Mothed1 Start Windows 2000 OS and Internet Connect, Select "Windows Update", Select Driver Update, Install Windows2000 USB2.0 Driver...

  • Page 43: Mbios&Dx9 Install Bios Live Update Utility And Directx9

    3. Select Finish after setup complete 4. Execute MY GUARD utility, On-time Monitoring your system health NOTE: MAGIC INSTALL will auto detect file path X:\INTEL865\HEALTH\SETUP.EXE This driver supports WINDOWS 95/98/98SE/NT4.0/2000 4-7 MBIOS&DX9 Install BIOS Live Update Utility and DIRECTX9 1. Click Magic BIOS when Magic Install 2.
  • Page 44 5. When On-line update BIOS the program will 6. Click Next if you need update BIOS, after auto-check your BIOS version upgrade BIOS, the system will clear CMOS and automatically restart Click Yes if you want to update the BIOS When System programming BIOS don’t turn otherwise choose No to exit off power, after finish update BIOS, the...

  • Page 45: Pc-Cillin Install Pc-Cillin2004 Anti-Virus Program

    4-8 PC-CILLIN Install PC-CILLIN 2004 Anti-virus program 1. Click PC-CILLIN when MAGIC INSTALL 2. Click NEXT when the "Trend Micro internet MENU appear security" installshield wizard windows appear 3. This is license agreement, select "I Accept 4. Click NEXT and Enter your Customer the terms"...

  • Page 46: How To Update Bios

    STEP 2. Copy utility program to your boot disc. You may copy from DRIVER CD X:\FLASH\AWDFLASH.EXE or download from our web site. STEP 3. Copy latest BIOS for 865GF from our web site to your boot disc. STEP 4. Insert your boot disc into A:, start the computer, type “Awdflash A:\865GFAxxx.BIN /SN/PY/CC/R”...

Table of Contents