Shehds LED Zoom Par 18x18W RGBWA UV lighting User Manual

Shehds LED Zoom Par 18x18W RGBWA UV lighting User Manual

Advertisement

LED Zoom Par 18x18W RGBWA UV lighting

1-Maintenance

1.Please keep the light in dryness and avoiding use in wet place.
2.Using intermittenlly can be extended the life.
3.Attention to clean the fan and lens usually in order to get the ventilating effects and lighting effects
better.
4.Please do not wipe the crust using organic menstruum for avoid to damaged the product.

2-Statement

The product has well capability and intact packing when leave factory,All of the user should comply
with above warning item and manual ,any misuse cause of the damages are not included in our
guarantee,and also can't be responsible for any malfunction & problem owing to ignore the manual.
Please forgive that we will not be notice for technical change

3-Attention Item

1.For guarantee the life of product,please do not put it on the wet place and not use it the place over
40 degree.
2.Please don't lay the product on the un-fixable or shakable place.
3.Ask for the professional to maintain the product in order to avoid the danger of get an electric
shock.
4.Power supply should not be changed over +&-10% while the light is using,it will be decreased the
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LED Zoom Par 18x18W RGBWA UV lighting and is the answer not in the manual?

Questions and answers

Milo
January 28, 2025

when I plug this in the **** comes on, but the dmx menu screen doesnt light up or turn on???

1 comments:
Mr. Anderson
February 10, 2025

The DMX menu screen may not turn on due to several possible reasons:

1. Power Supply Issue – Ensure the power supply voltage is stable and within the allowed range (not exceeding ±10% variation).
2. Faulty Connection – Check if the power cable is properly connected and the outlet is functional.
3. Environmental Conditions – Make sure the light is not in a wet or excessively hot environment (above 40°C), which could affect its operation.
4. Internal Damage – If the light has been misused, placed on an unstable surface, or exposed to moisture, it may have internal damage.
5. Component Failure – The screen or internal electronics could be faulty, requiring professional maintenance.

If the issue persists, professional servicing is recommended to avoid electric shock risks.

This answer is automatically generated

Subscribe to Our Youtube Channel

Summary of Contents for Shehds LED Zoom Par 18x18W RGBWA UV lighting

  • Page 1 LED Zoom Par 18x18W RGBWA UV lighting 1-Maintenance 1.Please keep the light in dryness and avoiding use in wet place. 2.Using intermittenlly can be extended the life. 3.Attention to clean the fan and lens usually in order to get the ventilating effects and lighting effects better.
  • Page 2 life of lamp if the power is too high,but it will be influenced the luminosity if the power is too low. 5.After power off,if it is need used again,please cool down over 20 minuter. 6.Please look round the manual for ensure the product can be used normally. 4-Product Introduction * Power Supply:AC90--275V,50--60HZ * Power consumption:324W...
  • Page 3 DMX 12 Channel Summary D001-d512 Channel Value Features 0-255 Total light adjustment 0-255 Red Dimmer 0-255 Green Dimmer 0-255 Blue Dimmer 0-255 White Dimmer 0-255 Amber Dimmer 0-255 Violet Dimmer 0-255 Strobe 0-255 Focusing CH10 0-255 Focusing Stop 0-239 Function CH11 240-255 Sound control...

Table of Contents

Save PDF