Summary of Contents for Shehds LED Beam+Wash 19x15W RGBW Zoom Lighting
Page 1
LED Beam+Wash 19x15W RGBW Zoom Lighting Maintenance 1.Please keep the light in dryness and avoiding use in wet place. 2.Using intermittenlly can be extended the life. 3.Attention to clean the fan and lens usually in order to get the ventilating effects and lighting effects better.
shock. 4.Power supply should not be changed over +&-10% while the light is using,it will be decreased the life of lamp if the power is too high,but it will be influenced the luminosity if the power is too low. 5.After power off,if it is need used again,please cool down over 20 minuter. 6.Please look round the manual for ensure the product can be used normally.
Please restart it 20 minutes later after turning off light , until full-cooling. Frequent switching will reduce the life span of lamps and bulbs; intermittent using will improve the life of bulbs and lamps. In order to make sure the product is used well, please read the Manual carefully. ...
Page 5
CH29 0-255 Rest DMX Channel Summary-15 Channels Mode Channel Value Features 0-255 Pan X axis rotation 0-255 Tilt Y axis rotation 0-255 Focusing 0-255 Pan/Tilt rotation speed adjustment 0-255 LED1 Total dimming adjustment 0-255 Red Dimmer 0-255 Green Dimmer 0-255 Blue Dimmer 0-255 White Dimmer...
Need help?
Do you have a question about the LED Beam+Wash 19x15W RGBW Zoom Lighting and is the answer not in the manual?
Questions and answers