Shehds SHE-SFP1203A User Manual

Led flat par 12x3w rgbw

Table of Contents

Download this manual

LED Flat Par 12x3W RGBW Manual

Maintenance

1.Please keep the light in dryness and avoiding use in wet place.

2.Using intermittenlly can be extended the life.

3.Attention to clean the fan and lens usually in order to get the ventilating effects and lighting effects

better.

4.Please do not wipe the crust using organic menstruum for avoid to damaged the product.

The product has well capability and intact packing when leave factory,All of the user should comply with

above warning item and manual ,any misuse cause of the damages are not included in our

guarantee,and also can't be responsible for any malfunction & problem owing to ignore the manual.

Please forgive that we will not be notice for technical change

1.For guarantee the life of product,please do not put it on the wet place and not use it the place over 40

degree.

2.Please don't lay the product on the un-fixable or shakable place.

3.Ask for the professional to maintain the product in order to avoid the danger of get an electric shock.

Table of Contents

Do you have a question about the SHE-SFP1203A and is the answer not in the manual?

Page 1 LED Flat Par 12x3W RGBW Manual Maintenance 1.Please keep the light in dryness and avoiding use in wet place. 2.Using intermittenlly can be extended the life. 3.Attention to clean the fan and lens usually in order to get the ventilating effects and lighting effects better.
Page 2 4.Power supply should not be changed over +&-10% while the light is using,it will be decreased the life of lamp if the power is too high,but it will be influenced the luminosity if the power is too low. 5.After power off,if it is need used again,please cool down over 20 minuter. 6.Please look round the manual for ensure the product can be used normally.
Page 3 AdYE Adye-DMX512 signal priority control Adno-Manual control priority control Au01 Preset color Mode selection 1-8 FF99 Color Jump, (001-99) EE99 Color gradient, (001-99) CC99 Color pulse, (001-99) F000 Strobe from fast to slow (001-255) Soud Sound control function r000 Red color selection, (001-255) by the "UP" key or "DOWN" down key to modify the red brightness G000 Green color selection, (001-255) by the "UP"...
Page 4 D:Enter E:LED Display Instructions:Press the function key A cycled out the eight different function effects,digital tube first two digits on behalf of which the current function(see menu).The last two digits represent the functions in which the address code or speed parameters.Press the B or C key to modify the parameter values.Press the D key to confirm.

She-rcsfp1203a