Table of Contents
Advertisement
This section is to explain the cautions the users must know in some case that possible injure
may bring to users when it's used or installed. For this reason, please read all details here and
make in mind before installing or using the product.
2.1 General Precautions
Must be operated and maintained free of dust or dirty.
The cover should be securely fastened, do not open the cover of the products when the power is
on.
After use, securely stow away all loose cables, external antenna, and others.
2.2 Power precautions
When you connect the power source, make sure if it may cause overload.
Avoid operating on a wet floor in the open. Make sure the extension cable is in good condition
Make sure the power switch is off before you start to install the device
2.3 Device's Installation Flow Chart Illustrated as following
2.4 Environment Requirement
Item
Machine Hall Space
Machine Hall Floor
Environment
Website: http://www.baudcom.com.cn
Chapter 2 Installation Guide
When user installs machine frame array in one machine hall, the
distance between 2 rows of machine frames should be 1.2~1.5m
and the distance against wall should be no less than 0.8m.
Electric Isolation, Dust Free
Volume
resistivity
7
10
1X10
~1X10
，Grounding current limiting resistance: 1M
(Floor bearing should be greater than 450Kg/㎡)
5~40℃(sustainable )，0~45℃(short time)，
Tel: +86 21 37709251 Email:info@baudcom.com.cn
5
IP QAM DTV Headend Processor User Manual
Requirement
of
ground
anti-static
material:
Advertisement
Table of Contents
