Table of Contents
Advertisement
IP QAM DTV Headend Processor User Manual
Chapter 3 Web NMS Management
This device supports management by web-based NMS.
3.1 Login
The factory default IP address of this device is 192.168.0.136. Users can connect the
device and web NMS through this IP address.
Connect the PC (Personal Computer) and the device with a net cable, and use ping
command to confirm they are on the same network segment. Launch the web browser
an input the device IP address in the browser's address bar and press Enter.
It will display the Login interface as Figure-1. Input the Username and Password
(Both the default Username and Password are "admin". And then click "OK" to start
the device setting.
Figure-1
3.2 Operation
3.2.1 Summary
When we confirm the login, it will display the summary interface as Figure-2 where users have an
over view of the system information and alarm log.
Website: http://www.baudcom.com.cn
Tel: +86 21 37709251 Email:info@baudcom.com.cn
8
Advertisement
Table of Contents
