Wire's Connection; Power Cord Connection; Signal And Nms Cable Connection - Baudcom BD-QAM-10G User Manual

IP QAM DTV Headend Processor User Manual

2.8 Wire's Connection

2.9 Power cord connection

The power socket is located on the right of rear panel, and the power switch is on
the left of front panel. User can plug one end of the power cord to the socket and
insert the other end to AC power. When the device solely connects to protective
ground, it should adopt independent way, say, share the same ground with other
devices. When the device adopts united way, the grounding resistance should be
smaller than 1Ω.
Caution: Before connecting power cord to BD-QAM-10G DTV Headend
Processor, user should set the power switch to "OFF".

2.10 Signal and NMS Cable Connection

The signal connections include the connection of input signal cable and the
connection of output signal cable.
Website: http://www.baudcom.com.cn Tel: +86 21 37709251 Email:info@baudcom.com.cn
7