Table of Contents
Advertisement
TS-2200 User's Manual
1 Introduction
The model TS-2200 is a compact, full-featured PC compatible Single Board Computer based on the
386EX processor. If you are coming up from the 8-bit microcontroller world, you will find that this
product provides much more performance and much quicker development since you can now use
standard PC development tools such as Turbo C or Quick Basic. If you have done work in the PC
world in the past, you will find you can now build applications for a very small target that does not
require a keyboard, video, floppy disks, or hard drives.
You can typically write and debug code on a host PC using standard development tools for the PC
platform, then simply copy it to and run it on the TS-2200 without modification. If additional peripherals
are required, the PC/104 expansion bus allows for many standard functions available off-the-shelf. It
is also very simple to create a custom PC/104 daughter board for those special features that
differentiate your product. Technologic Systems can provide technical support as well as a free
quotation for any custom hardware, software, or BIOS modifications you may require.
This manual is fairly short. This is because for the most part, the TS-2200 is a standard 80386 based
PC compatible computer, and there are hundreds of books about writing software for the PC platform.
The purpose of this manual is documenting where the TS-2200 differs from a standard PC.
2 PC Compatibility
PC compatibility requires much more than just a 386 processor. It requires PC compatible memory
and I/O maps as well as a PC compatible BIOS. The General Software EMBEDDED BIOS offers a
high degree of compatibility with past and present BIOS standards allowing it to run off-the shelf
operating systems and application software.
The EMBEDDED BIOS has been tested with all major versions of DOS, including MS-DOS, DR-DOS,
and Embedded DOS 6-XL; all major versions of OS/2, including MS-OS/2 and IBM OS/2; MS-
Windows 3.1, Windows-95, Windows NT, and NetWare 386.
Technologic Systems Embedded PCs are compatible with a wide variety of x86 based
operating systems. A partial list OSes currently used with our boards by customers includes:
• GNU/Linux, kernel versions 1.0.x, 2.0.x, and 2.2.x
• TNT Embedded Toolsuite, Phar Lap Software
• RTKernel, On Time Software
• RTEMS, On-Line Applications Research Corporation
• DOS with Waterloo TCP (WATTCP), public domain TCP/IP source code for DOS
3 Power
The TS-2200 requires regulated +5VDC at 650mA (typical). A quick release screw-down terminal
block for the +5V power and power GND connections is provided for easy connection to an external
power supply.
When power is first supplied to the TS-2200, the board mounted LED (labeled D2) is immediately
turned on under hardware control. Once the processor begins execution, the LED is turned off under
software control. If the LED does not turn on at all, the most likely problem is the power supply. Check
that the +5V and GND connections are not reversed. A diode protects the board against damage in
such a situation, but it will not run.
Please note that supply voltages over +6VDC may damage the TS-2200. Be sure to use a regulated
+5VDC power supply.
5
Technologic Systems
11/06/2000
Advertisement
Table of Contents
