All servicing, other than cleaning, should be performed by an authorized service representative. See Warranty section. 8. The use of accessories or attachments not recommended by Salton may result in fire, electric shock or personal injury. 9. DO NOT use outdoors. 10.DO NOT let cord hang over edge of table or counter, or touch hot surfaces.
17.DO NOT use the Kettle without the Lid in place. WARNING: Do not remove the lid while the Kettle is boiling. 18.Scalding may occur if the Lid is opened while the Kettle is hot. 19.Direct kettle spout away from cabinets, walls, etc. to prevent possible steam damage. 20.DO NOT use the Kettle if liquid is below the 0.5L (MIN) or above 1.7L (MAX) marking. 21.DO NOT attempt to remove any housing parts or insert foreign objects into the kettle. SAVE THESE INSTRUCTIONS HOUSEHOLD USE ONLY IMPORTANT – HIGH ALTITUDE LOCATIONS Water boils at lower temperatures at high altitudes. For every 152 meters (500 feet) above sea level, the boiling point of water will be 0.5°C (1°F) lower than the boiling point of 100°C (212°F) at sea level.
DESCRIPTION OF PARTS 1. Spout 2. Control Panel a. Keep Warm b. °C/°F Button c. Power Button 3. Handle 4. Power Base 5. Cord Wrap 6. Kettle Lid BEFORE FIRST USE 1. Read all instructions carefully and keep them for future reference. 2. Remove all packaging. 3. Fill the Kettle with 1 L (4 cups) of cold tap water and bring to a boil. 4. Add 500 mL (2 cups) of white vinegar and let stand for at least 1 hour or overnight. Discard.
Page 5
5. Plug into a 120V AC wall outlet. The display will show the actual water temperature. The Kettle is now in standby mode. NOTE: If no selection has been made in 30 seconds, the display will shut off and the Kettle will enter Sleep Mode. Press any button once to “Wake up” the Kettle. NOTE: Never plug kettle into an electrical outlet when the kettle is empty. 6. Direct kettle spout away from cabinets, walls, etc. to prevent possible steam damage. 7. The default temperature is 100°C (212°F). The variable temperature range is 40 to 100°C (105 - 212°F) in 10 degree Celsius increments. 8. To boil water: - Press the power button once. - To switch between the Celsius and Fahrenheit display press the °F/°C button for 3 seconds. - The display will show 100°C (212°F) for 3 seconds then the display will switch to the actual water temperature. The display temperature will increase until the kettle reaches 100°C (212°F).
Page 6
15.It is recommended that the Power Cord be disconnected from the wall outlet when not in use. 16.DO NOT attempt to connect any other appliance to the Power Base or tamper with the connector in any way. KEEP WARM FUNCTION 1. Hold the Keep Warm Button for 3 seconds, then press the °C/°F Button until you reach one of the 6 desired ‘keep warm’ temperature settings between 40 - 90°C (104 – 194°F). Press the power button once. IMPORTANT: The Keep Warm Function cannot be used for the 100°C/212°F temperature setting. 2. The Keep Warm symbol on the display will be illuminated when the Keep Warm function has been activated. NOTE: The Keep Warm function will remain active for 2 hours if the Kettle remains on the base. If the Kettle is lifted off the base the Keep Warm setting is cancelled. 3. The Keep Warm Function can be deactivated at any time by pressing the Power Button once. WATER TEMPERATURE GUIDE The following is a general guide for brewing different types of tea.
Your kettle can also be used for bringing the water to the perfect temperature for the following. Please remember that these are guidelines only. Others: Water Temperature Baby formula preparation 40°C / 104°F (water should have been previously boiled) Hot Chocolate 80°C / 176°F Instant soup mixes 90°C / 194°F Oatmeal 90°C / 194°F CARE AND CLEANING 1. All servicing, other than cleaning, should be performed by an authorized service representative.
Page 8
LIMITED WARRANTY **The original sales receipt is the only acceptable proof of purchase** Salton Appliances (1985) Corp. warrants that this appliance shall be free from defects in material and workmanship for a period of three (3) year from the date of original purchase.
Page 9
2-3 weeks) For added protection, we suggest that you use an insured delivery service with tracking information when returning your product. Salton Appliances (1985) Corp. will not be held responsible for in-transit damage or for packages that are not received.
Need help?
Do you have a question about the GK2077 and is the answer not in the manual?
Questions and answers