Freemotion GZPL40320 Owner's Manual page 10

CABLE GUARDS
Check for alignment periodically to ensure that guards
are not dragging on the cable and that they are per-
forming their intended duty. If the alignment is not
proper, loosen the bolt slightly and readjust as neces-
sary.
ADJUSTMENT KNOB
If an adjustment knob sticks, it will need to be relubri-
cated. Disassemble the knob and apply a light coat-
ing of lithium grease. Reassemble the knob as shown
in the diagram. If the adjustment knob still does not
function properly, the spring may need to be replaced.
To order a new spring, refer to ORDERING
REPLACEMENT PARTS on the back cover of this
manual.
Correct Alignment
Cable
Guards
Incorrect Alignment
Rubbing
Adjustment Knob Diagram
Adjustment
Spring
Pin
10
Guards
Pulley
Contacts
Cable
Out of
Alignment
Housing
Knob
Cable