Cisco CCNA 2 Instructor Manual page 63

Module 6: Routing and Routing Protocols
Overview
When teaching Module 6, remind students that routing refers to the directions that are given to
move packets from one network to another. These directions, which are also known as routes,
can be dynamically given to the router by another router, or they can be statically assigned to
the router by an administrator. Make sure students understand static routing.
Module 6 Caution
This information contains fundamental terminology that instructors may need to get the
students interested in learning about. Make sure students understand this material so that
static and dynamic routing can be compared in future lessons.
Students who complete this module should be able to perform the following tasks:
•
Explain the significance of static routing
•
Configure static and default routes
•
Verify and troubleshoot static and default routes
•
Identify the classes of routing protocols
•
Identify distance-vector routing protocols
•
Identify link-state routing protocols
•
Describe the basic characteristics of common routing protocols
•
Identify interior gateway protocols
•
Identify exterior gateway protocols
•
Enable Routing Information Protocol (RIP) on a router
62 - 238 CCNA 2: Routers and Routing Basics v3.1 Instructor Guide – Module 6
Copyright © 2004, Cisco Systems, Inc.