Loss in
1. The drive belt is worn.
transmission
2. The drive belt has fallen from the
/ reduced
washer.
speed
3. The friction drive wheel is worn.
Termination or
1. The rotor belt has fallen from the
delay of snow
pulley.
removal
2. The rotor belt is worn.
3. Clogged snow-throwing sleeve.
4. Locked screw / rotor
The lights are
1. The engine does not work.
not glowing
2. Loose cable connections.
3. The LED light is burnt.
1. Check / replace the drive belt.
2. Check / replace the drive belt.
3. Contact your service center's experts.
1. Check / replace the rotor belt.
2. Check / replace the rotor belt.
3. Clean the sleeve.
4. Remove junk or foreign objects from
the auger / rotor
1. Start the engine.
2. Check the cable connections of the
engine and headlamp.
3. Replace the LED light
43