Viglen Vig680M Manual page 30

 Connecting the Processor Fan Heat Sink Cable
Connect the processor fan heat sink power cable to the 4-pin processor fan header (see
Figure 25). A fan with a 4-pin connector as shown in Figure 25 is recommended.
1. Make sure the four hooks are in the proper position before you install the cooler.
Figure 25: Connecting the processor fan heat sink power cable to the processor fan header
 Removing the Processor
For instructions on how to remove the processor fan heat sink and processor, refer to the
processor installation manual.
29
V1.0 Vig680M Motherboard Manual