Table of Contents
Advertisement
Fan Power Connectors: CPUFAN, SYSFAN1~2
The fan power connectors support system cooling fans with +12V. If the mainboard has a
System Hardware Monitor chipset on-board, you must use a specially designed fan with
a speed sensor to take advantage of the CPU fan control. Remember to connect all
system fans. Some system fans may not connect to the mainboard and will instead
connect to the power supply directly. A system fan can be plugged into any available
system fan connector.
Figure 15: Fan Power connectors
Serial ATA Connector: SATA1 ~ SATA4
This connector is a high-speed Serial ATA interface port. Each connector can connect to
one Serial ATA device. Serial ATA devices include disk drives (HD ), solid state drives
(SSD), and optical drives (CD/ DVD/ Blu-Ray).
Figure 16: Serial ATA Connector
NOTE:
Please do not fold the serial ATA cable into 90-degree angle. Otherwise, data loss may
occur during transmission.
23
V1.0
Vig680M Motherboard Manual
Advertisement
Table of Contents
