Table of Contents
Advertisement
Chapter 2: System Board Options
The Vig680M motherboard is capable of accepting Intel® Core i3, i5, i7 processors and
Intel Pentium processors. RAM can be upgraded to a maximum of 16GB using DDR3
1066, 1333 or 1600MHz RAM DIMMs Non ECC Unbuffered memory.
WARNING!
Unplug the system before carrying out the procedures described in this chapter.
Failure to disconnect power before you open the system can result in personal
injury or equipment damage. Hazardous voltage, current, and energy levels are
present in this product. Power switch terminals can have hazardous Voltages
present even when the power switch is off.
The procedures assume familiarity with the general terminology associated with
personal computers and with the safety practices and regulatory compliance
required for using and modifying electronic equipment.
Do not operate the system with the cover removed. Always replace the cover
before turning on the system.
As the colours of the wires in the mains lead of this computer may not correspond with the
coloured markings identifying the terminals in your plug precede as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug
which is marked by the letter E or by the safety Earth symbol
and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the
letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the
letter L or coloured red.
V1.0
CAUTION!
The Viglen Vig680M motherboard
and associated components are
sensitive electronic devices. A small
static shock from your body can
cause expensive damage to your
equipment.
Vig680M Motherboard Manual
Q
or coloured green or green-
16
Advertisement
Table of Contents
