Table of Contents
Advertisement
en Cleaning and servicing
Display
1
Factory setting (may vary according to model)
2
Depending on the appliance specifications
22.2 Changing the basic settings
Requirement: The appliance is switched off.
1.
Press and hold the
four seconds.
a The first basic setting appears in the display,
e.g. .
Use the temperature selector to change the setting.
2.
Use the
or
button to switch to the next basic
3.
setting.
23 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
23.1 Cleaning agent
To avoid damaging the different surfaces of the appli-
ance, do not use unsuitable cleaning agents.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
Do not use steam- or high-pressure cleaners to
▶
clean the appliance.
ATTENTION!
Unsuitable cleaning agents damage the surfaces of the
appliance.
Do not use aggressive or abrasive cleaning agents.
▶
Suitable cleaning agents
Only use cleaning agents that are suitable for the differ-
ent surfaces on your appliance.
Appliance
Surface
Suitable cleaning agents Information
Stainless steel
¡ Hot soapy water
¡ Special stainless steel
Enamel, plastic,
¡ Hot soapy water
painted, and
screen-printed
surfaces
E.g. control panel
Knobs
¡ Hot soapy water
Ceramic hob
¡ Glass ceramic cleaner Follow the cleaning instructions on the product packaging.
Plinth drawer
¡ Hot soapy water
26
Basic setting
Automatic rapid heating from 200 °C
2
Reset all values to factory settings
button for approx.
cleaning products
suitable for hot sur-
faces
To save the changes, press and hold
4.
four seconds.
Note: Your changes to the basic settings will be re-
tained even after a power failure.
22.3 Discarding changes to the basic
settings
Turn the function selector.
▶
a All changes are discarded and not saved.
Do not use cleaning products with a high alcohol
▶
content.
Do not use hard scouring pads or cleaning
▶
sponges.
Do not use any special cleaners if the appliance is
▶
still warm.
Using oven cleaner in a hot cooking compartment
damages the enamel.
Do not use oven cleaner in the cooking compart-
▶
ment when it is still warm.
Remove all food remnants from the cooking com-
▶
partment and the appliance door before you next
heat up the appliance.
New sponge cloths contain residues from production.
Wash new sponge cloths thoroughly before use.
▶
Follow the instructions on cleaning the appliance.
→ "Cleaning the appliance", Page 27
To prevent corrosion, remove any limescale, grease, starch or albu-
min (e.g. egg white) stains on stainless steel fronts immediately.
Apply a thin layer of the stainless steel cleaning product with a soft
cloth.
Do not use glass cleaner or a glass scraper.
Clean with a dish cloth and dry with a soft cloth.
Do not remove or scrub.
Remove heavy soiling using a glass scraper.
Clean with a dishcloth.
Selection
= No
1
= Yes
1
= no
= yes
for approx.
- Quick Links:
- Installation and Connection
Hide quick links:
Advertisement
Table of Contents
