Advertisement
Streamlined Installation: Try These Steps First!
Streamlined Installation: Try These Steps First!
This router is configured for the most common type of installation. To set up the router quickly, try
performing the following steps. If you cannot complete a step, or if you want more information at any
point, skip to the
in the other sections of this Quick Start Guide.
Cable the router. Connect your PCs to the router, and connect the router to a DSL line.
Step 1
Connect the power. Connect the AC adapter to the router, and plug the AC adapter into a wall socket.
Step 2
Start, or restart, a PC that is connected to the router.
Step 3
Start a web browser on the PC (Netscape version 3.0 to 4.7, or Internet Explorer version 4.0 or later,)
Step 4
and enter the URL http://10.10.10.1. The home page of the router should appear after 1 or 2 minutes.
If you have no special configuration requirements, click the Router Setup link on the home page, and
Step 5
then click Quick Setup. (This may appear as Easy Setup on some models.)
Enter the user name and password provided to you by your Internet service provider. Check the Test
Step 6
Connection box, and click Apply. (If no Test Connection box is present, click the Test Connection link
after clicking Apply.)
Step 7
Click the Router Password link on the home page and set a password for the router.
Step 8
Select Start/Run, and type winipcfg in the Open field of the Run window. When the IP Config window
appears, click Release. Then click Renew to release and renew the PC's IP address. Alternatively, enter
ipconfig /release to release the PC's IP address, and then enter ipconfig /renew to renew the IP address
of the PC.
Open a web browser on the PC, and connect to a website. If you connected to a website, you have
Step 9
successfully completed the installation.
If you could not connect to a website, see the
Step 10
complete the steps described in the other sections of this Quick Start Guide.
This document describes the basic process of cabling and configuring the Cisco 800 and SOHO series
routers.
Parts List
The shipment of your Cisco router includes the following items:
•
•
•
•
•
•
•
If any of the items is missing or damaged, contact your customer service representative.
Cisco 820 Series and SOHO Series Routers Cabling and Setup Quick Start Guide
2
"1: Connect the Router to a PC" section on page
One Cisco 827, 827H, 827-4V, or 828 router, or one SOHO 77, 77H, or 78 router
One yellow Ethernet cable
One lavender ADSL cable
One light blue console cable
One black power supply
One black power supply cord
One Cisco 800 and SOHO Series Product Documentation
3, and complete the steps described
"1: Connect the Router to a PC" section on page
3, and
78-13937-04
Advertisement
