Table of Contents
Advertisement
Configuring IP Address
3. At the "#" prompt, enter the following command and press <Enter> as shown
in Figure 3-5.
XGS-6320-8X8TR # configure terminal
XGS-6320-8X8TR (config)# interface vlan 1
XGS-6320-8X8TR (config-if-vlan)# ip address 192.168.1.100 255.255.255.0
The previous command would apply the following settings for the Managed Switch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
4. Repeat step 1 to check if the IP address has changed.
If the IP is successfully configured, the Managed Switch will apply the new IP
address setting immediately. You can access the Web interface of the Managed
Switch through the new IP address.
8
Figure 3-5: Configuring IP Address Screen
Advertisement
Table of Contents
