Table of Contents
Advertisement
3.1 Logging on to Console
Once the terminal is connected to the device, power on the Managed Switch, and
the terminal will display "running testing procedures". Then, the following message
asks to log in user name and password. The factory default user name and
password are shown as follows and the login screen in Figure 3-3 appears.
Username: admin
Password: admin
The following console screen based on the XGS-6320-8X8TR will be
the same as that of the XGS-6320-12X4TR.
Note
Figure 3-3: Managed Switch Console Login Screen
The user can now enter commands to manage the Managed Switch. For a detailed
description of the commands, please refer to the following chapters.
1. For security reason, please change and memorize the new pass-
word after this first setup.
2. Only accept command in lowercase letter under console inter-
Note
face.
6
Advertisement
Table of Contents
