Wires Connection - COBAN GROUP G05 User Manual

4.2.3 Recommended installation place:
the front windscreen;
③
material for skin);
Notice: If the windscreen glued by metal thermal insulation layer or heating
layer, it will reduce the GPS receive signal and lead to GPS work disorder, then
please change the installation place.
4.3 Device light description
Light
Red light
Yellow light
Blue
Note: the three lights must be stable lighting represents device can work normally.
Device will turn into sleep mode with lights off after around 3 minutes, it will wake up if
make a call to device number or detect any vibration.

5. Wires connection

1) Red wire connects to vehicle power anode
2) Black wire connects to vehicle power cathode
3) Yellow wire connects to oil or circuit control wires
4) Green wire connects to ACC ignition wire
6
①
②
The hidden place around former dashboard (nonmetal
The hidden place in the board below the back windscreen.
Signal
Power
GSM signal
GPS signal
The hidden place in the board below
Normal status
Stable light on
Stable light on
Stable light on